Autogredere
Pret la cerere
Noul autogreder Cat® 120 Next Generation va ofera optiunea de a-l configura cu comanda pe volan sau pe joystick-uri, precum si cu optiunea de tractiune integrala (AWD). Unul dintre beneficiile notabile ale acestui model este reducerea de pana la 15% a a consumului de carburant. De asemenea, cabina si optiunile de confort au fost mult imbunatatite, iar tehnologiile de ghidare sunt acum integrate din fabrica.
Descriere
+
-
Engine
| Net Power Range (Tier 4) | 104 kW |
| Number of Cylinders | 6 |
| Standard Capability | 50 °C |
| Torque Rise - ISO 9294 | 42% |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA |
| Engine Model | Cat 7.1 |
| Net Power Range (Tier 3) | 93 kW |
| Derating Altitude | 3000 m |
| Bore | 105 mm |
| All-Wheel Drive Net Power Range (Tier 3) | 97 kW |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269Standards in effect at the time of manufacture. |
| Derating Altitude (AWD) | 1676 m |
| Note (2) | Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Maximum Torque - ISO 9249 | 822 N·m |
| Maximum Torque - AWD On | 828 N·m |
| Engine RPM | 2,000 |
| Note (3) | Power as declared per ISO 14396 |
| Stroke | 135 mm |
| Displacement | 7.01 l |
Machine Weight
| Lever/Steering Wheel Weight* Tier 4 | 15906 kg |
| Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 | 16661 kg |
| Joystick All-Wheel Drive (AWD) Weight* Tier 3 | 16499 kg |
| Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 3 | 16454 kg |
| Joystick All-Wheel Drive (AWD) Weight* Tier 4 | 16713 kg |
| Joystick Weight* Tier 4 | 16038 kg |
| Joystick Weight* Tier 3 | 15824 kg |
| Lever/Steering Wheel Weight* Tier 3 | 15699 kg |
| Note (1) | *Typically equipped includes 3.7 m (12 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
Moldboard
| Blade Width | 3.7 m |
| Throat Clearance | 105 mm |
| Arc Radius | 413 mm |
| End Bit | 152 mm |
| Blade Height | 610 mm |
| Cutting Edge | 152 mm |
Blade Range
| Moldboard Side Shift Left | 512 mm |
| Circle Center Shift Right | 656 mm |
| Maximum Depth of Cut | 775 mm |
| Maximum Shoulder Reach Right | 1928 mm |
| Blade Tip Range Forward | 40 |
| Maximum Shoulder Reach Left | 1764 mm |
| Maximum Lift Above Ground | 410 mm |
| Moldboard Side Shift Right | 663 mm |
| Circle Center Shift Left | 656 mm |
| Blade Tip Range Backward | 5 |
Service Refill Capacities
| Hydraulic System | 97 l |
| Cooling System | 52.5 l |
| Engine Crankcase | 18 l |
| Transmission and Differential | 34 l |
| Fuel Tank | 246 l |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 15 l |
| Circle Drive | 7 l |
Dimensions
| Length of Machine* | 9838 mm |
| Width | 2592 mm |
| Width All Wheel Drive (AWD) | 100.4 in |
| Note | *Typically equipped with push block and ripper. |
| Maximum Height | 3465 mm |