Incarcatoare compacte pe roti
Pret la cerere
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
Gallery 906
906

Încărcătoarele frontale Cat® stabilesc standardul în ceea ce privește productivitatea, eficiența consumului de combustibil și confortul operatorului. Încărcătorul compact Cat 906 este echipat cu un motor C2.8 care funcționează împreună cu un grup motopropulsor inteligent pentru a oferi o eficiență excepțională a consumului de combustibil. Diferențialul blocabil în timpul deplasării și transmisia hidrostatică asigură o funcționare lină și puternică, sporind în același timp eficiența ciclurilor utilajului.

Specificatii tehnice
Descriere
+ -
Engine
Maximum Gross Power 55.7 kW
Engine Model Cat C2.8*
Maximum Engine Speed 2550 rpm
Maximum Gross Power - Rated Engine Speed 2400 r/min
Maximum Gross Power - SAE J1995 55.7 kW
Maximum Gross Power - ISO 14396 55.4 kW
Maximum Gross Power - ISO 14396 (metric) 75.3 mhp
Rated Net Power - Rated Engine Speed 2400 r/min
Rated Net Power - SAE J1349 54.2 kW
Rated Net Power - ISO 9249 53.8 kW
Rated Net Power - 2,400 rpm - ISO 9249 (metric) 73.1 mhp
Maximum Gross Torque - SAE J1995 300 N·m
Maximum Gross Torque - ISO 14396 300 N·m
Maximum Net Torque - SAE J1349 296 N·m
Maximum Net Torque - ISO 9249 295 N·m
Displacement 2.8 l
Bore 90 mm
Stroke 110 mm
Note *Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1) Maximum gross and net torque measured at 1,600 rpm.
Note (2) Net power ratings are tested at the reference conditions for the specified standard.
Note (3) Net power advertised is the power available at the flywheel.
Weights
Operating Weight 5730 kg
Buckets
Bucket Capacities 0.75-1.55 m³ (1.0-2.0 yd³)
Bucket Capacities - General Purpose 0.80-1.35 m³ (1.0-1.7 yd³)
Bucket Capacities - Light Material 1.25-1.55 m³ (1.6-2.0 yd³)
Multi-Purpose 0.75-1.1 m³ (1.0-1.4 yd³)
Note All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Note (1) Bucket capacities stated include BOCE, in line with ISO 7546.
Service Refill Capacities
Fuel Tank 70 l
Cooling System 12 l
Engine Crankcase 8.8 l
Axles - Front Center Differential 8.8 l
Axles - Rear Center Differential 8.8 l
Hydraulic System - Including Tank 67.5 l
Hydraulic Tank 44.6 l
Transmission 2.4 l
Note No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.
Axles
Front Fixed Locking Differential (standard)
Note Oscillation of ±11 degrees via hitch between front and rear frames.
Rear Fixed Locking Differential (standard)
Steering
Steering Articulation Angle - Each Direction 39 °
Maximum Flow - Steering Pump 46.7 l/min
Maximum Working Pressure - Steering Pump 23000 kPa
Steering Cycle Times – (full left to full right) – at High Idle 3 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.25 turns or 4.00 turns
Transmission
Forward and Reverse - Speed Range Creep# 10 km/h
Forward and Reverse - Speed Range 1* 10 km/h
Forward and Reverse - Speed Range 2** - High Speed 17 km/h
Forward and Reverse - Speed Range 2** - Standard 19 km/h
Forward and Reverse - Speed Range 3*** 40 km/h
Note #Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).
Note (1) *Creep function not available in this gear or above.
Note (2) **Max speed dependent on model and configuration (standard vs. high speed transmission).
Note (3) ***Reverse is 30 km/h (19 mph).
Tires
Tire Size - Standard *405/70 R18 SPT9
Tire Size - Optional 405/70 R18 Powerloads
Tire Size - Optional (1) 340/80 R18 XMCL/Bibload
Tire Size - Optional (2) 340/80 R18 TRI 2
Tire Size - Optional (3) 40X14-20 TL, SM/TR
Tire Size - Optional 4 340/80 R18 Duraforce
Note *This tire has been used for all dimension, stability and performance data.
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (1) Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 71 dB(A).
Note (3) *Measurements were conducted with the cab doors and windows closed.
Note (4) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 101 dB(A). 99 dB(A) Low Sound – Option available.
Loader Hydraulic System
Hydraulic Cycle Time - Rackback 2.2 s
Note *Adjustable from 20% to 100% of maximum flow through display.
Hydraulic System
Main Relief - 1st Auxiliary (3rd slice) 23500 kPa
Main Relief - 1st Auxiliary (3rd slice) - Standard Flow 75 l/min
Main Relief - 1st Auxiliary (3rd slice) - High Flow 115 l/min
Main Relief - 2nd Auxiliary (4th slice) 23500 kPa
Main Relief - 2nd Auxiliary (4th slice) - Flow 43 l/min
Hydraulic Cycle Time - Lift 5 s
Hydraulic Cycle Time - Dump 1.6 s
Hydraulic Cycle Time - Lower, Float 2.8 s
Dimensions - With SSL Coupler - Approximate
Height - Ground to Cab 2468 mm
Height: Ground to Beacon** 2651 mm
Height: Ground Axle Center** 480 mm
Height - Ground Clearance 300 mm
Length - Overall with Bucket 5527 mm
Length: Rear Axle to Bumper 1391 mm
Length: Hitch to Front Axle 1085 mm
Length - Wheel Base 2170 mm
Clearance - Bucket at 45° 2385 mm
Clearance: Load over Height** 2900 mm
Clearance - Level Bucket 3030 mm
Height - Bucket Pin 3244 mm
Height: Overall** 4205 mm
Reach - Bucket at 45° 822 mm
Carry Height: Bucket Pin 335 mm
Dig Depth 85 mm
Width - Bucket 1890 mm
Width - Tread Center 1420 mm
Turning Radius - Over Bucket 4481 mm
Width - Over Tires 1840 mm
Turning Radius: Outside of Tires 4007 mm
Turning Radius - Inside Tire 2128 mm
Rack Angle at Full Lift 50°
Dump Angle at Full Lift 45°
Rack Angle at Carry 46°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^ 5835 kg
Tipping Load – Straight – ISO 14397-1 † 3907 kg
Tipping Load – Full Turn – ISO 14397-1 † 3248 kg
Operating Weight: Carriage and Tines ^^ 5640 kg
Tipping Load - Straight † 3338 kg
80% of Tip: Firm and Level EN474-3 †† 2254 kg
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or...
Dimensions - With HPL-V Coupler - Approximate#
Height: Ground to Cab** 2468 mm
Height: Ground to Beacon** 2651 mm
Height: Ground Axle Center** 480 mm
Height: Ground Clearance** 300 mm
Length: Overall* 5369 mm
Length: Rear Axle to Bumper 1391 mm
Length: Hitch to Front Axle 1085 mm
Length: Wheel Base 2170 mm
Clearance: Bucket at 45° * 2499 mm
Clearance: Load over Height** 2900 mm
Clearance: Level Bucket** 3038 mm
Height: Bucket Pin** 3244 mm
Height: Overall** 4115 mm
Reach: Bucket at 45° * 725 mm
Carry Height: Bucket Pin 311 mm
Dig Depth** 77 mm
Width: Bucket 1890 mm
Width: Tread Center 1420 mm
Turning Radius: Over Bucket 4406 mm
Width: Over Tires 1840 mm
Turning Radius: Outside of Tires 4007 mm
Turning Radius: Inside of Tires 2128 mm
Rack Angle at Full Lift 56°
Dump Angle at Full Lift 45°
Rack Angle at Carry 51°
Departure Angle - Degrees 30°
Articulation Angle - Degrees 39°
Operating Weight: Bucket ^ 5730 kg
Tipping Load - Straight - ISO 14397-1 † 4427 kg
Tipping Load - Full Turn - ISO 14397-1 † 3701 kg
Operating Weight: Carriage and Tines ^^ 5552 kg
Tipping Load - Straight † 3514 kg
80% of Tip: Firm and Level EN474-3 †† 2364 kg
Note (1) *Vary with bucket
Note (2) **Vary with tire
Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 0.95 m3 (1.2 yd3) general purpose bucket.
Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class II carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).
Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.
Note (6) ††Full compliance to EN474-3 and SAE J1197.
Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.
Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9EM 405/70 R18 tires and 0.95 m3 (1.2 yd3) general purpose bucket with bolt-on cutting edge or...