Modelul Cat® 730 este echipat cu o cabina cu design de top, reproiectata pe baza informatiilor primite de la operatori din toata lumea pentru a spori confortul si usurinta de exploatare. Imbunatatirile includ comenzi noi, functii de protectie a transmisiei, sistemul de asistare cu troliu, sistemul avansat de control automat al tractiunii, sistemul de avertizare a rasturnarii cu asistenta de stabilitate si modul Eco, pentru optimizarea consumului de carburant
Engine Model | Cat® C13 |
Bore | 130 mm |
Stroke | 157 mm |
Displacement | 12.5 l |
Net Power - ISO 14396 | 276 kW |
Gross Power - SAE J1995 | 280 kW |
No Engine De-rating Below | 3810 m |
Peak Engine Torque Speed | 1200 r/min |
Peak Engine Torque Net (SAE J1349) | 2120 N·m |
Net Power - SAE J1349 | 274 kW |
Engine Model - U.S. EPA Tier 4 Final/EU Stage V | Cat C13 |
Peak Engine Torque Gross (SAE J1995) | 2141 N·m |
Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Emissions | The 730 meets Tier 4 Final and Stage V emission standards. |
Note (2) | The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. |
Note (1) | The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. |
Note (4) | Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. |
Note (5) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API... |
Rated Payload | 28 t |
Heaped (SAE 2:1) | 17.5 m³ |
Struck | 13.3 m³ |
Tailgate Heaped SAE 2:1 | 18.8 m³ |
Tailgate Struck | 13.9 m³ |
Forward - 1 | 8 km/h |
Forward - 2 | 15 km/h |
Forward - 3 | 22 km/h |
Forward - 4 | 34 km/h |
Forward - 5 | 47 km/h |
Forward - 6 | 55 km/h |
Reverse - 1 | 9 km/h |
Interior Cab | 72 dB(A) |
Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested... |
Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Front Axle - Empty | 15000 kg |
Front Axle - Loaded | 18280 kg |
Center Axle - Rated Load | 12360 kg |
Rear Axle - Loaded | 16700 kg |
Center Axle - Loaded | 16920 kg |
Total - Rated Load | 28000 kg |
Front Axle - Rated Load | 3280 kg |
Total - Loaded | 51900 kg |
Center Axle - Empty | 4560 kg |
Rear Axle - Empty | 4340 kg |
Total - Empty | 23900 kg |
Rear Axle - Rated Load | 12360 kg |
Fuel Tank | 412 l |
Cooling System | 83 l |
Hydraulic System | 110 l |
Engine Crankcase | 38 l |
Transmission | 47 l |
Final Drives/Differential | 125 l |
Output Transfer Gear Box | 24 l |
DEF Tank | 20 l |
Raise Time | 12 s |
Lower Time | 8 s |
Lock to Lock | 4.75 seconds @ 60 rpm |
Brakes | ISO 3450 – 2011 |
Cab - FOPS | ISO 3449 Level II – 2005 |
Cab - ROPS | ISO 3471 – 2008 |
Steering | ISO 5010 – 2007 |
Type | High strength Brinell HB450 wear resistant steel |
Turning Dimensions - Aisle Width | 5332 mm |
Turning Dimensions - Steer Angle - Left/Right | 45° |
Turning Dimensions - Inside Radius | 3879 mm |
Turning Dimensions - SAE Turning Radius | 7470 mm |
Note | Dimensions are for machines equipped with 23.5R25 tires. |
Turning Dimensions - Clearance Radius | 8075 mm |
Base Plate | 13 mm |
Side Plates | 11 mm |
Front Plate | 7 mm |
Wheel Loaders: 966M/966M XE - Passes | 4 |
Wheel Loader: 962M - Passes | 4–5 |
Wheel Loader: 950M - Passes | 5 |
Hydraulic Excavators: 336F/336F XE - Passes | 5–6 |
Hydraulic Excavators: 349F/349F XE - Passes | 4–5 |
Note | An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in... |
Wheel Loaders: 972M/972M XE - Passes | 3–4 |