S3090 Rotating Scrap & Demolition Shear

Mobile Scrap & Demolition Shears

S3090 Rotating Scrap & Demolition Shear_1

S3090 Rotating Scrap & Demolition Shear_2

S3090 Rotating Scrap & Demolition Shear_3

Cat® Scrap and Demolition Shears are designed to make you money. An innovative, robust design and fast cycle times provide the production and reliability you need to be profitable. Cat shears are efficient and can handle everything from structural steel to mixed scrap. Cat shears are designed to get the job done.

Options to Meet Your Needs

Cut More, Cut Faster

More productive by design. Shears are designed as a system solution to cut more tons per day and make you more money by balancing machine capabilities, shear cylinder size, jaw depth and opening, and leveler arm length.
Increase cut efficiency by up to 15 percent and reduce blade wear with the dual offset apex jaw design.
Accurately place the jaws in optimum cutting position without moving the machine with the standard 360° rotator on the S3000 Series.
Power is consistent through the entire cutting cycle.
The shears are optimized for Cat excavators to ensure proper matching, optimal cycle times, and range of motion.
Increase cutting efficiency with tapered spacer plates which reduce jamming and drag.
The cylinder rod is completely protected inside the frame reducing downtime and the risk of damage and allowing for a slimmer design for better visibility.
The jaw relief area allows material to fall away freely without hindering the next cutting cycle.

Long-Lasting Quality

Cut More, Cut Faster

Long-Lasting Quality

Reduce maintenance costs with the new Bolt-on Piercing Tip. Dowels protect the bolts from stress that leads to loosening and a bushing equalizes force on both halves of the tip to help prevent splitting.
Work confidently with demanding hydraulic requirements. Major hydraulic components are built with a 4 to 1 safety factor and can withstand pressure spikes up to 20,000-psi (1378 bar).
Increase overall durability with the solid plate construction of the upper jaw.
The housing is designed with a 60 percent safety factor in yield strength and high-stress areas are built with extra thick plates.
The heel plate is constructed of AR400 high-wear resistant material to provide long life between weld build up and replacement.
Endure high forces with confidence with the oversized torque tube.

Easy to Maintain

Long-Lasting Quality

Easy to Maintain

Easily and safely complete maintenance tasks. Shears can be greased at ground level along with the machine stick cylinder pin and boom pin.
Reduce downtime with field serviceable swivels. Removing and resealing can be done quickly and easily while the shear is mounted to the machine, without the need to take it to a shop.
Service and adjust the pivot group without the need for any special tools. The side play can be easily adjusted by simply tightening the pin.
Easily change the tip and flip the blade in thirty minutes with standard tools.
Access the cylinder’s hoses and speed valve easily from the side of the shear. This feature eliminates the need for a cover that can fall off and need repaired.
You are supported. The Cat Dealer Network is your one point of contact for all your service needs.

Options to Meet Your Needs

Easy to Maintain

Options to Meet Your Needs

Connecting your shear to a variety of machines has never been easier. Dual high-pressure ports allow the shear to attach to any compatible machine regardless of the hydraulic layout.
Meet your specific needs with straight and rotating configurations and boom and stick mount options.
- Straight – S2000 Series
  - Boom mounted
  - Used in secondary demolition and scrap applications
  - Rotator is eliminated, reducing maintenance costs
  - Larger shears can be used on smaller machine size classes
- Rotating – S3000 Series
  - Boom or Stick mounted
  - Used in scrap, primary, and secondary demolition applications
  - Provides optimal cycle times and positioning
- Boom Mounted – Ideal for scrap applications, boom mounted shears allow for easier handling and operation.
- Stick Mounted – Ideal for demolition applications, stick mounted shears are compatible with larger machines and provide a greater reach.

Cut More, Cut Faster

+ -

Stick Mounted - Minimum	90 tons
Stick Mounted - Maximum	110 tons
Boom Mounted - Maximum	54 tons
Boom Mounted - Minimum	30 tons
Cycle Time - Close	3.4 Seconds

+ -

Weight - Boom Mount	9020 kg
Weight - Stick Mount	8760 kg
Length	5370 mm
Height	1810 mm
Width	1300 mm
Jaw Width - Fixed	602 mm
Jaw Width - Moving	168 mm
Jaw Opening	910 mm
Jaw Depth	900 mm
Throat Force	11746 kN
Apex Force	4754 kN
Tip Force	2513 kN
Cutting Circuit - Maximum Relief Pressure	35000 kPa
Cutting Circuit - Maximum Flow	700 l/min
Rotation Circuit - Maximum Relief Pressure	14000 kPa
Rotation Circuit - Maximum Flow	80 l/min

Excavatoare pe senile de talie mare

390F

374

395

Excavatoare pe senile de talie mare

390F

374

395