Tiltrotators, TRS6 Tiltrotator

Tiltrotators

Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.

Compatibility Note

Complete 360 Degree Rotation

Provides optimal control of your work tools to provide greater flexibility.

Integrated Central Lubrication System

Complete 360 Degree Rotation

Integrated Central Lubrication System

A single point of entry for grease allows the entire unit to be greased quickly and easily.

TRS6 Positioning System

Integrated Central Lubrication System

TRS6 Positioning System

Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.

Oil Filled Gearbox

TRS6 Positioning System

Oil Filled Gearbox

A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.

Heavy Duty Worm Gear

Oil Filled Gearbox

Heavy Duty Worm Gear

Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.

Double Acting Cylinder with Load Hold Valve

Heavy Duty Worm Gear

Double Acting Cylinder with Load Hold Valve

Valves sustain holding pressures and prevent cylinder movement under load constraints.

Visual Verification Indicator

Double Acting Cylinder with Load Hold Valve

Visual Verification Indicator

The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.

Locking Control System (LCS)

Visual Verification Indicator

Locking Control System (LCS)

LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.

Compatibility Note

Locking Control System (LCS)

Compatibility Note

Only compatible with the following Next Gen machines and serial numbers:

306 CR - S/N 6G6 1 & Up

Compatibility Note

Only compatible with the following Next Gen machines and serial numbers:

306 CR - S/N 6G6 1 & Up

Complete 360 Degree Rotation

+ -

Machine Class	6 Ton Mini Excavators
Interface Options: Top-Bottom	Pin-On / Pin Grabber
Rotation Speed	7 Seconds per 1 Full Rotation
Tilt Angle Range +/-	40 degrees left/right
Optimal Hydraulic Flow	45-80 L/min (12-21 gpm)
Required Hydraulics	1st Auxiliary

+ -

Weight	210 kg
Overall Height	905 mm
Length	526 mm
Overall Width	490 mm
Maximum Bucket Capacity	250 l
Maximum Bucket Width	1200 mm
Maximum Operating Pressure	25000 kPa
Tilting Torque	14408.3 N·m
Turning Torque	3900 N·m

Miniexcavatoare pe senile

306 CR

305 CR

Miniexcavatoare pe senile

306 CR

305 CR