Three Axle Articulated Trucks, 735 Articulated Truck, Cat® C13B
Three Axle Articulated Trucks
For tough quarry and mining jobs, rely on the Cat® 735 articulated truck. Its 35.3-ton (32-tonne) payload capacity is pass-matched with excavators and loaders to help you move more material and boost productivity across any jobsite.
+
-
Engine
| Engine Model | Cat® C13B |
| Note (1) | Advertised power is tested at 1,800 rpm. |
| Note (2) | Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Note (3) | Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. |
| Note (4) | Net power when the fan is at maximum speed is 319 kW (427 hp) per the SAE reference conditions. |
| Note (5) | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
| Note (6) | Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
Sound Levels
| Note (1) | The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Body Plate
| Type | High strength Brinell HB450 wear resistant steel |
Standards
| Brakes | ISO 3450 – 2011 |
| Cab - FOPS | ISO 3449 Level II – 2005 |
| Cab - ROPS | ISO 3471 – 2008 |
| Steering | ISO 5010 – 2019 |
Turning Circle
| Turning Dimensions - Steer Angle - Left/Right | 45° |
| Note | Dimensions are for machines equipped with 750/65 R25 tires. |
Steering
| Lock to Lock | 4.75 seconds @ 60 rpm |
Optimal Loader/Truck Pass Matching
| Hydraulic Excavators: 350/352 - Passes | 4-5 |
| Hydraulic Excavators: 336 - Passes | 5-6 |
| Wheel Loaders: 972/972 XE - Passes | 3-4 |
| Wheel Loaders: 966/966 XE - Passes | 4 |
| Wheel Loader: 962 - Passes | 4-5 |
| Wheel Loader: 950 - Passes | 5 |
| Note | An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
+
-
Engine
| Gross Power (SAE J1995) | 325 kW |
| Net Power (SAE J1349) | 319 kW |
| Engine Power (ISO 14396) | 322 kW |
| Bore | 130 mm |
| Stroke | 157 mm |
| Displacement | 12.5 l |
| No Engine De-rating Below | 3810 m |
| Peak Engine Torque Gross (SAE J1995) | 2206 N·m |
| Peak Engine Torque Net (SAE J1349) | 2185 N·m |
| Peak Engine Torque Speed | 1200 r/min |
Weights
| Rated Payload | 32 t |
Body Capacities
| Heaped (SAE 2:1) | 20 m³ |
| Struck | 16 m³ |
| Tailgate Heaped SAE 2:1 | 21.7 m³ |
| Tailgate Struck | 17 m³ |
Transmission
| Forward - 1 | 8 km/h |
| Forward - 2 | 15 km/h |
| Forward - 3 | 23 km/h |
| Forward - 4 | 35 km/h |
| Forward - 5 | 48 km/h |
| Forward - 6 | 57 km/h |
| Reverse - 1 | 9 km/h |
Sound Levels
| Interior Cab | 72 dB(A) |
Operating Weights
| Front Axle - Empty | 14780 kg |
| Center Axle - Empty | 5080 kg |
| Rear Axle - Empty | 4850 kg |
| Total - Empty | 24710 kg |
| Front Axle - Rated Load | 4054 kg |
| Center Axle - Rated Load | 13973 kg |
| Rear Axle - Rated Load | 13973 kg |
| Total - Rated Load | 32000 kg |
| Front Axle - Loaded | 18834 kg |
| Center Axle - Loaded | 19053 kg |
| Rear Axle - Loaded | 18823 kg |
| Total - Loaded | 56710 kg |
Body Plate Thickness
| Front Plate | 7 mm |
| Base Plate | 13 mm |
| Side Plates | 11 mm |
Service Refill Capacities
| Fuel Tank | 400 l |
| DEF Tank | 34 l |
| Cooling System | 83 l |
| Hydraulic System | 123 l |
| Engine Crankcase | 43 l |
| Transmission | 47 l |
| Final Drives/Differential | 125 l |
| Output Transfer Gear Box | 25 l |
Body Hoist
| Raise Time | 12 s |
| Lower Time | 11 s |
Turning Circle
| Turning Dimensions - SAE Turning Radius | 7470 mm |
| Turning Dimensions - Clearance Radius | 8075 mm |
| Turning Dimensions - Inside Radius | 3879 mm |
| Turning Dimensions - Aisle Width | 5332 mm |
+
-
NOTE
OPERATOR ENVIRONMENT
- - Retractable belt: Operator seat and second seat
- - Touchscreen display incorporating the rearview camera video feed
- - Windshield wiper and washer, two speed, intermittent (front)
- - Mirrors: exterior
- - Windows opening side, tinted
- - Heater and defroster with four-speed fan
- - Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted - - Sun visor
- - Secondary steering – electro hydraulic
- - Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp - - Air conditioning
- - Combined gear selection and hoist control lever
- - Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt - - Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Secondary steering energy source engaged
– Hour meter
– Retarder active - - Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook - - Tilt and telescopic steering wheel
- - Adjustable air vents
TECHNOLOGY
- - Product Link Cellular PLE643
- - Cat® Detect with Stability Assist
ELECTRICAL AND LIGHTING
- - Remote starting receptacle (cables not included)
- - Electrical system: 24-volt, 10A 24- to 12-volt converter
- - Horn
- - Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators - - Main disconnect switch
- - Batteries (x2) maintenance free
POWERTRAIN
- - Cat Clean Emission Module (CEM) and exhaust aftertreatment package
- - Three axle, six-wheel drive
- - Auto shift six-speed forward and single-speed reverse transmission
- - Retarder: engine compression brake and hydraulic
- - Dual circuit oil immersed, enclosed brakes – all wheels
- - Cat C13B engine
- - Differentials: standard with automatic clutched inter- and cross-axle differential locks
SAFETY
- - Rollover protective structure/Falling objects protective structure (ROPS/FOPS) cab
- - Rearview camera
- - Reverse alarm
GUARDS
- - Crankcase
- - Front dump body spill guard, integral part of fabricated body
- - Rear window
- - Radiator
OTHER STANDARD EQUIPMENT
- - Vandalism protection: lockable caps
- - Tires, six 750/65 R25
- - Mud flaps: wheel arch and body mounted with transportation tiebacks
- - Scheduled Oil Sampling (S•O•S) sampling valves
- - Sound suppression (standard in some countries*)
*Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzerland, Türkiye and UK.
+
-
NOTE
OPERATOR ENVIRONMENT
- - Seat, heated/cooled
- - Mirrors, heated motorized
- - Infrared glass – high ambient cab
- - Window blinds
- - Radio, Bluetooth® stereo system
- - Operator seat belt, four-point
- - Windshield wiper and washer, two speed (rear)
TECHNOLOGY
- - Cat® Payload monitoring system
- - Product Link Dual PLE683
- - Operator Coaching
ELECTRICAL AND LIGHTING
- - Cold weather start attachment (2 additional batteries)
- - Engine block heater
- - Ether start
- - Flashing LED beacon
- - Roof mounted LED work lights
OPTIONAL EQUIPMENT
- - Fuel additive – anti-waxing
- - Scissor tailgate
- - Exhaust heated body
- - Cold weather coolant –51° C (–60° F)
- - Auto lube installation for automatic greasing of bearings
- - Bare chassis (no body) standard wheel base
- - Bare chassis (no body) long wheel base
- - Wheel chocks
- - Body liners
- - Fast fuel fill
