Blades
23.8 m³ (30.8 yd³ )
Cat Woodchips U-Blades will move more with less effort than using a standard U-blade. The sidebars on the wings are near vertical for penetration into a pile, this lets the operator cut a load loose from a larger mass of wood chips. The side wings are angled in to the...
72.6 m³ (95.0 yd³)
Cat Woodchips U-Blades will move more with less effort than using a standard U-blade. The sidebars on the wings are near vertical for penetration into a pile, this lets the operator cut a load loose from a larger mass of wood chips. The side wings are angled in to the...
45.9 m³ (60.0 yd³)
Cat Woodchips U-Blades will move more with less effort than using a standard U-blade. The sidebars on the wings are near vertical for penetration into a pile, this lets the operator cut a load loose from a larger mass of wood chips. The side wings are angled in to the...
28.3 m³ (37.0 yd³)
Cat Woodchips U-Blades will move more with less effort than using a standard U-blade. The sidebars on the wings are near vertical for penetration into a pile, this lets the operator cut a load loose from a larger mass of wood chips. The side wings are angled in to the...
15.3 m³ (20.0 yd³)
Cat Woodchips U-Blades will move more with less effort than using a standard U-blade. The sidebars on the wings are near vertical for penetration into a pile, this lets the operator cut a load loose from a larger mass of wood chips. The side wings are angled in to the...
6.9 m³ (9.0 yd³)
VR Blades are an ideal choice for site development and general construction, where the ground must be first dug up then dozed into the required contour, and the material conditions vary widely. With the VR blade, one machine can efficiently accomplish both tasks, regardless of the ground conditions.
7.8 m³ (10.3 yd³)
VR Blades are an ideal choice for site development and general construction, where the ground must be first dug up then dozed into the required contour, and the material conditions vary widely. With the VR blade, one machine can efficiently accomplish both tasks, regardless of the ground conditions.
53.5 m³ (70.0 yd³)
These U-blades are designed for pure production: moving bulk material at the lowest cost in time and fuel. The sidebars on the wings are near vertical for penetration into a pile—this lets the operator cut a load loose from a larger mass. The side wings are angled toward the center,...
16.4 m³ (21.5 yd³)
These U-blades are designed for pure production: moving bulk material at the lowest cost in time and fuel. The sidebars on the wings are near vertical for penetration into a pile—this lets the operator cut a load loose from a larger mass. The side wings are angled toward the center,...