TRS6 Tiltrotator

Tiltrotators
TRS6_0
TRS6_1
TRS6_2
TRS6_3
TRS6_4
TRS6_5
TRS6_6
TRS6_0
TRS6_1
TRS6_2
TRS6_3
TRS6_4
TRS6_5
TRS6_6

Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.

Compatibility Note
Complete 360 Degree Rotation
Provides optimal control of your work tools to provide greater flexibility.
Integrated Central Lubrication System
Complete 360 Degree Rotation
Integrated Central Lubrication System
A single point of entry for grease allows the entire unit to be greased quickly and easily.
TRS6 Positioning System
Integrated Central Lubrication System
TRS6 Positioning System
Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.
Oil Filled Gearbox
TRS6 Positioning System
Oil Filled Gearbox
A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
Heavy Duty Worm Gear
Oil Filled Gearbox
Heavy Duty Worm Gear
Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
Double Acting Cylinder with Load Hold Valve
Heavy Duty Worm Gear
Double Acting Cylinder with Load Hold Valve
Valves sustain holding pressures and prevent cylinder movement under load constraints.
Visual Verification Indicator
Double Acting Cylinder with Load Hold Valve
Visual Verification Indicator
The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
Grapple Attachment
Visual Verification Indicator
Grapple Attachment
Used to pick up objects such as pipe and debris.
Locking Control System (LCS)
Grapple Attachment
Locking Control System (LCS)
LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.
Compatibility Note
Locking Control System (LCS)
Compatibility Note
Only compatible with the following Next Gen machines and serial numbers:
  • 306 CR - S/N 6G6 1 & Up
Complete 360 Degree Rotation
+ -
Machine Class 6 Ton Mini Excavators
Interface Options: Top-Bottom S-40 / S-40
Rotation Speed 7 Seconds per 1 Full Rotation
Tilt Angle Range +/- 40 degrees left/right
Optimal Hydraulic Flow 45-80 L/min (12-21 gpm)
Required Hydraulics 1st Auxiliary
+ -
Weight 245 kg
Overall Height 819 mm
Length 609 mm
Overall Width 574 mm
Maximum Bucket Capacity 250 l
Maximum Bucket Width 1200 mm
Maximum Operating Pressure 25000 kPa
Tilting Torque 14408.3 N·m
Turning Torque 3900 N·m
Grapple Gripping Force, Opened to Maximum 7.1 kN
Grapple Maximum Lifting Capacity 300 kg
Grapple Maximum Opening 414 mm
Grapple Length 233 mm

Miniexcavatoare pe senile
306 CR
305 CR
Gallery 306 CR

Miniexcavatoare pe senile
306 CR
305 CR
Gallery 306 CR