Tiltrotators, TRS8 Tiltrotator

Tiltrotators
TRS8_0
TRS8_1
TRS8_2
TRS8_3
TRS8_4
TRS8_5
TRS8_6
TRS8_0
TRS8_1
TRS8_2
TRS8_3
TRS8_4
TRS8_5
TRS8_6

Cat® Tiltrotators for excavators provide 360-degree rotation and 40-degree tilting action side-to-side, allowing the machine to reach more work areas from a single position. The tiltrotator enables the operator to maneuver around posts, rocks, and other obstacles, as well as to reach along ditch edges more easily.

Compatibility Note
Complete 360 Degree Rotation
Provides optimal control of your work tools to provide greater flexibility.
Integrated Central Lubrication System
Complete 360 Degree Rotation
Integrated Central Lubrication System
A single point of entry for grease allows the entire unit to be greased quickly and easily.
TRS8 Positioning System
Integrated Central Lubrication System
TRS8 Positioning System
Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.
Oil Filled Gearbox
TRS8 Positioning System
Oil Filled Gearbox
A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
Heavy Duty Worm Gear
Oil Filled Gearbox
Heavy Duty Worm Gear
Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
Double Acting Cylinders with Load Hold Valves
Heavy Duty Worm Gear
Double Acting Cylinders with Load Hold Valves
Valves sustain holding pressures and prevent cylinders movement under load constraints required by directives.
Visual Verification Indicator
Double Acting Cylinders with Load Hold Valves
Visual Verification Indicator
The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
Optional Grapple Attachment
Visual Verification Indicator
Optional Grapple Attachment
Used to pick up objects such as pipe and debris.
Locking Control System (LCS)
Optional Grapple Attachment
Locking Control System (LCS)
LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.
Compatibility Note
Locking Control System (LCS)
Compatibility Note
Only compatible with the following Next Gen machines and serial numbers:
  • 307.5 - S/N GW7 1 & Up
  • 308 - S/N GG8 1 & Up
  • 308 - S/N GW8 1 & Up
  • 308.5 - S/N GZ8 1 & Up
  • 309 - S/N GG9 1 & Up
  • 309 - S/N GW9 1 & Up
  • 310 - S/N GWT 1 & Up
Complete 360 Degree Rotation
+ -
Machine Class 7-10 Ton Mini Excavators
Interface Options: Top-Bottom S-50 / S-50
Rotation Speed 7 Seconds per 1 Full Rotation
Tilt Angle Range +/- 40 degrees left/right
Optimal Hydraulic Flow 45-75 L/min (12-20 gpm)
Required Hydraulics 1st Auxiliary
+ -
Weight 310 kg
Overall Height 945 mm
Length 608 mm
Overall Width 678 mm
Maximum Bucket Capacity 500 l
Maximum Bucket Width 1500 mm
Maximum Operating Pressure 25000 kPa
Tilting Torque 26499.5 N·m
Turning Torque 6600 N·m

Miniexcavatoare pe senile
308 CR VAB
309 CR VAB
308 CR (Braț Fix)
310
Gallery 308 CR VAB

Miniexcavatoare pe senile
308 CR VAB
309 CR VAB
308 CR (Braț Fix)
310
Gallery 308 CR VAB