Miniincarcatoare pe roti
Pret la cerere
Gallery 246D3
Gallery 246D3
246D3

Miniincarcatorul pe roti Cat® 246D3 dispune de un sistem cu ridicare radiala, care asigura performante excelente si inaltime superioara in pozitia mediana a ridicarii, precum si o putere exceptionala a barei de tractiune.

Specificatii tehnice
Descriere
+ -
Engine
Gross Power - SAE J1995 55.4 kW
Net Power - SAE 1349 54.4 kW
Displacement 3.3 l
Stroke 120 mm
Bore 94 mm
Peak Torque - 1,500 rpm - SAE J1995 265 N·m
Engine Model Cat C3.3B DIT (turbo)
Net Power - ISO 9249 54.9 kW
Net Flywheel Power 54.4 kW
Operating Specifications
Rated Operating Capacity 1000 kg
Tipping Load 2000 kg
Breakout Force - Tilt Cylinder 3336 kg
Rated Operating Capacity with Optional Counterweight 1095 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no...
Weights
Operating Weight 3392 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no...
Dimensions
Wheel Base 1249 mm
Height - Top of Cab 2110 mm
Vehicle Width over Tires 1676 mm
Ground Clearance 226 mm
Departure Angle 26°
Maximum Dump Angle 39°
Bumper Overhang - Behind Rear Axle 1083 mm
Rack Back Angle - Maximum Height 96°
Length - Without Bucket 2993 mm
Maximum Overall Height 4032 mm
Maximum Reach - With Arms Parallel to Ground 1388 mm
Length - With Bucket on Ground 3708 mm
Turning Radius from Center - Coupler 1401 mm
Bucket Pin Height - Carry Position 200 mm
Bucket Pin Height - Maximum Lift 3154 mm
Clearance at Maximum Lift and Dump 2465 mm
Turning Radius from Center - Bucket 2181 mm
Turning Radius from Center - Machine Rear 1806 mm
Reach - Maximum Lift/Dump 600 mm
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1676 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no...
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Pressure 23000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 33 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 28000 kPa
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 57 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 121 l/min
Hydraulic Flow - Standard - Loader Hydraulic Flow 86 l/min
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Power Train
Travel Speed - Forward or Reverse - One Speed 12.5 km/h
Travel Speed - Forward or Reverse - Two Speed Option 17.7 km/h
Service Refill Capacities
Chain Box - Each Side 12.7 l
Cooling System 14 l
Engine Crankcase 11 l
Fuel Tank 105 l
Hydraulic System 52 l
Hydraulic Tank 39 l
Noise Level
Inside Cab* 81 dB(A)
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab** 101 dB(A)
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling...
Air Conditioning System (if equipped)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.