M Series Motor Graders
Pret la cerere
The M Series Motor Grader has become the industry standard in operational efficiency and overall productivity. The 24M is designed to help you build and maintain the haul roads needed to support maximum efficiency in large mining operations. Unprecedented operator comfort and ease of service help to maximize your return on investment.
Descriere
+
-
Engine
| Base Power (1st Gear) - Net | 397 kW |
| Engine Model | Cat® C18 ACERT™ |
| Base Power (All Gears) - Net | 397 kW |
| Base Power (All Gears) - Net - Metric | 397 kW |
| Displacement | 18.1 l |
Power Train
| Forward/Reverse Gears | 6 Forward/3 Reverse |
| Transmission | Automatic, electronic power shift |
| Brakes - Service | Oil-actuated, oil-disc |
| Brakes - Service - Surface Area | 101508 cm² |
| Brakes - Parking | Spring applied, hydraulically released |
| Brakes - Secondary | Oil-actuated, oil-disc |
Hydraulic System
| Circuit Type | Electro-hydraulic load sensing, closed center |
| Pump Type | Variable piston |
| Pump Output | 550 l/min |
| Maximum System Pressure | 24150 kPa |
| Standby Pressure | 3100 kPa |
Operating Specifications
| Top Speed - Forward | 43.4 km/h |
| Top Speed - Reverse | 41.6 km/h |
| Turning Radius - Outside Front Tires | 12.4 m |
| Steering Range - Left/Right | 47.5° |
| Articulation Angle - Left/Right | 25° |
| Reverse - 1R | 5.5 km/h |
| Forward - 3F | 9.7 km/h |
| Forward - 1F | 3.7 km/h |
| Forward - 6F | 43.4 km/h |
| Reverse - 2R | 14.5 km/h |
| Forward - 2F | 5.7 km/h |
| Forward - 4F | 15.1 km/h |
| Reverse - 3R | 41.6 km/h |
| Forward - 5F | 28 km/h |
Service Refill
| Fuel Capacity | 1326 l |
| Cooling System | 90 l |
| Hydraulic System - Total | 264 l |
| Hydraulic System - Tank | 135 l |
| Circle Drive Housing - Each | 7.5 l |
| Transmission Oil | 87.1 l |
| Differential - Final Drives | 184 l |
| Engine Oil | 60 l |
| Tandem Housing - Each | 322 l |
| Front Wheel Spindle Bearing Housing | 4 l |
Frame
| Drawbar - Width | 225 mm |
| Circle - Diameter | 2631 mm |
| Circle - Blade Beam Thickness | 160 mm |
| Drawbar - Height | 215 mm |
| Height - Front Axle Center | 858 mm |
| Drawbar - Thickness | 16 mm |
| Front-Top/Bottom Plate - Width | 514 mm |
| Front-Top/Bottom Plate - Thickness | 50 mm |
| Front-Side Plates - Width | 415 mm |
| Front-Side Plates - Thickness | 25 mm |
| Front Axle - Height to Center | 817 mm |
| Front Axle - Wheel Lean - Left/Right | 18° |
| Front Axle - Total Oscillation per Side | 32° |
Tandems
| Height | 1040 mm |
| Width | 353 mm |
| Sidewall Thickness - Inner | 25 mm |
| Sidewall Thickness - Outer | 30 mm |
| Drive Chain Pitch | 76 mm |
| Wheel Axle Spacing | 2285 mm |
| Tandem Oscillation - Front Up | 20° |
| Tandem Oscillation - Front Down | 20° |
Moldboard
| Blade Width | 7.3 m |
| Arc Radius | 550 mm |
| Throat Clearance | 162 mm |
| Cutting Edge Width | 330 mm |
| Cutting Edge Thickness | 29 mm |
| End Bit - Width | 203 mm |
| End Bit - Thickness | 25 mm |
| Height | 1025 mm |
| Down Pressure - Base | 31563 kg |
| Blade Pull - Base | 39236 kg |
| Down Pressure - Maximum | 34316 kg |
| Thickness | 50 mm |
| Blade Pull - Maximum | 43518 kg |
| Width | 7.3 m |
Blade Range
| Circle Centershift - Right | 5338 mm |
| Circle Centershift - Left | 5332 mm |
| Moldboard Sideshift - Right | 4902 mm |
| Moldboard Sideshift - Left | 4528 mm |
| Maximum Blade Position Angle | 35° |
| Blade Tip Range - Forward | 40° |
| Blade Tip Range - Backward | 0° |
| Maximum Lift Above Ground | 634 mm |
| Maximum Depth of Cut | 657 mm |
| Maximum Shoulder Reach Outside of Tires - Left | 3222 mm |
| Maximum Shoulder Reach Outside of Tires - Right | 3228 mm |
Ripper
| Ripping Depth - Maximum | 454 mm |
| Ripper Shank Holders | 7 |
| Shank Holder Spacing - Minimum | 593 mm |
| Shank Holder Spacing - Maximum | 604 mm |
| Penetration Force | 13601 kg |
| Pry-Out Force | 18621 kg |
Weights
| Operating Weight - Typically Equipped | 65840 kg |
| Gross Vehicle Weight - Typically Equipped | 65840 kg |
| Gross Vehicle Weight - Maximum - Rear Axle | 48535 kg |
| Gross Vehicle Weight - Base - Front Axle | 19131 kg |
| Gross Vehicle Weight - Base - Rear Axle | 43595 kg |
| Gross Vehicle Weight - Maximum - Total | 69335 kg |
| Gross Vehicle Weight - Base - Total | 62726 kg |
| Gross Vehicle Weight - Typically Equipped - Total | 65840 kg |
| Gross Vehicle Weight - Maximum - Front Axle | 20800 kg |
| Gross Vehicle Weight - Typically Equipped - Rear Axle | 46290 kg |
| Gross Vehicle Weight - Typically Equipped - Front Axle | 19550 kg |
Standards
| Brakes | ISO 3450 |
| ROPS/FOPS | ISO 3471/ISO 3449 |
| Sound | ISO 6394/ISO 6395 |
| Steering | ISO 5010 |
Engine - U.S. EPA Tier 4 Interim Certified
| Standard - Ambient Capability | 50 °C |
| Maximum Torque - Net | 2713 N·m |
| Engine Model | Cat® C18 ACERT™ |
| Base Power (All Gears) - Net | 397 kW |
| Speed at Rated Power | 1800 r/min |
| Bore | 145 mm |
| Number of Cylinders | 6 |
| Derating Altitude | 2943 m |
| Standard - Fan Speed - Minimum | 60 r/min |
| Standard - Fan Speed - Maximum | 1325 r/min |
| Base Power (All Gears) - Net - Metric | 397 kW |
| Stroke | 183 mm |
| Displacement | 18.1 l |
Engine - Tier 2
| Base Power (All Gears) - Net - Metric | 397 kW |
| Standard - Fan Speed - Minimum | 60 r/min |
| Maximum Torque - Net | 2713 N·m |
| Torque Rise - Net | 30 % |
| Speed at Rated Power | 1800 r/min |
| Stroke | 183 mm |
| Displacement | 18.1 l |
| Base Power (All Gears) - Net | 397 kW |
| Derating Altitude | 3048 m |
| Standard - Fan Speed - Maximum | 1325 r/min |
| Number of Cylinders | 6 |
| Engine Model | Cat C18 ACERT |
| Standard - Ambient Capability | 50 °C |
| Bore | 145 mm |