Camioane articulate, 740 GC, Cat® C15
Camioane articulate
Pret la cerere
Modelul Cat® 740 GC este echipat cu o cabina cu design de talie mondiala, reproiectata pe baza informatiilor primite de la operatori din toata lumea pentru a spori confortul si usurinta de exploatare. Imbunatatirile includ comenzi noi, functii de protectie a transmisiei, sistemul de asistare cu troliu, sistemul avansat de control automat al tractiunii, sistemul de avertizare a rasturnarii cu asistenta de stabilitate si modul Eco, pentru optimizarea consumului de carburant.
Descriere
+
-
Engine
| Engine Model | Cat® C15 |
| Bore | 137 mm |
| Stroke | 171.5 mm |
| Displacement | 15.2 l |
| No Engine De-rating Below | 3050 m |
| Peak Engine Torque Speed | 1200 r/min |
| Peak Engine Torque Net (SAE J1349) | 2264 N·m |
| Net Power - SAE J1349 | 327 kW |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage V | Cat C15 |
| Gross Power - SAE J1995 | 337 kW |
| Net Power - ISO 14396 | 333 kW |
| Peak Engine Torque Gross (SAE J1995) | 2320 N·m |
| Emissions | The C15 engine meets Tier 4 Final and Stage V emission standards. |
| Note (4) | Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions. |
| Note (2) | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
| Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (1) | The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
| Note (5) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
Weights
| Rated Payload | 36.3 t |
Body Capacities
| Heaped (SAE 2:1) | 22.7 m³ |
| Struck | 17 m³ |
| Tailgate Heaped SAE 2:1 | 24.4 m³ |
| Tailgate Struck | 17.9 m³ |
Transmission
| Forward - 1 | 6.4 km/h |
| Forward - 2 | 8.5 km/h |
| Forward - 3 | 11.5 km/h |
| Forward - 4 | 14.8 km/h |
| Forward - 5 | 19.7 km/h |
| Forward - 6 | 24 km/h |
| Reverse - 1 | 6.8 km/h |
| Reverse - 2 | 15.7 km/h |
| Forward - 8 | 39.8 km/h |
| Forward - 7 | 33.1 km/h |
| Forward - 9 | 57.5 km/h |
Sound Levels
| Interior Cab | 72 dB(A) |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested... |
Operating Weights
| Center Axle - Empty | 6639 kg |
| Rear Axle - Empty | 6416 kg |
| Center Axle - Rated Load | 17087 kg |
| Front Axle - Empty | 19321 kg |
| Total - Empty | 32376 kg |
| Center Axle - Loaded | 23173 kg |
| Front Axle - Loaded | 22554 kg |
| Total - Rated Load | 36300 kg |
| Rear Axle - Rated Load | 17087 kg |
| Rear Axle - Loaded | 22949 kg |
| Front Axle - Rated Load | 2126 kg |
| Total - Loaded | 68676 kg |
Service Refill Capacities
| Fuel Tank | 550 l |
| Cooling System | 90 l |
| Engine Crankcase | 52 l |
| Axles - Each | 60 l |
| Brake Cooling Tank | 67 l |
| Transmission - OTG | 75 l |
| DEF Tank | 25 l |
| Steering/Hoist Hydraulic System | 140 l |
| Final Drive - Each | 5 l |
Body Hoist
| Raise Time | 12 s |
| Lower Time | 12 s |
Steering
| Lock to Lock | 4.75 seconds @ 60 rpm |
Standards
| Brakes | ISO 3450 – 2011 |
| Cab - FOPS | ISO 3449 Level II – 2005 |
| Cab - ROPS | ISO 3471 – 2008 |
| Steering | ISO 5010 – 2007 |
Body Plate
| Type | High strength Brinell HB450 wear resistant steel |
Turning Circle
| Turning Dimensions - SAE Turning Radius | 7698 mm |
| Turning Dimensions - Clearance Radius | 8395 mm |
| Turning Dimensions - Aisle Width | 5595 mm |
| Note | Dimensions are for machines equipped with 29.5 R25 tires. |
| Turning Dimensions - Steer Angle - Left/Right | 45° |
| Turning Dimensions - Inside Radius | 3960 mm |
Body Plate Thickness
| Side Plates | 11 mm |
| Base Plate | 13 mm |
| Front Plate | 7 mm |
Optimal Loader/Truck Pass Matching
| Note | An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in... |
| Wheel Loader: 972M - Passes | 3 |
| Wheel Loader: 962M - Passes | 5 |
| Wheel Loader: 966M - Passes | 4–5 |
| Hydraulic Excavator: 374F - Passes | 3–4 |
| Hydraulic Excavator: 352F - Passes | 5–6 |