Camioane rigide de talie medie
Pret la cerere
Seria G reprezinta o noua era pentru aceasta clasa de marime de la Cat. Cu contributia dvs., am proiectat si fabricat un camion fiabil, economic si care ofera operatorilor dvs. confort, incredere si control. Obiectivul nostru este succesul dvs. pe termen lung si, cu camioanele din seria G, suntem pe drumul cel bun.
Descriere
+
-
Engine
| Engine Model | Cat® C32 |
| Gross Power - SAE J1995 | 765 kW |
| Net Power - SAE J1349 | 704 kW |
| Net Power - ISO 9249 | 704 kW |
| Net Power - 80/1269/EEC | 704 kW |
| Bore | 146 mm |
| Stroke | 162 mm |
| Displacement | 32.1 l |
| Note (1) | Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard. |
| Note (3) | No engine derating required up to 4600 m (15,000 ft) for Tier 2 Equivalent. |
| Net Torque | 5286 N·m |
| Engine Power - ISO 14396 | 755 kW |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
| Cylinders | 12 |
| Peak Torque - Speed | 1200 r/min |
| Engine Speed | 1800 r/min |
| Net Power | 683 kW |
Weights - Approximate
| Target Gross Machine Weight | 164654 kg |
Operating Specifications
| Nominal Payload Class (100%) | 90.8 t |
| Top Speed - Loaded | 67.1 km/h |
| Body Capacity - SAE 2:1 | 64.1 m³ |
| Note (1) | Capacity with flat floor X Body with liner. |
| Note (2) | Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross vehicle weight limitations. |
| Maximum Working Payload (110%) | 99.8 t |
| Maximum Allowable Payload (120%)* | 109 t |
| Target Payload (100%) | 90.8 t |
Transmission
| Forward - 1 | 10.9 km/h |
| Forward - 2 | 14.8 km/h |
| Forward - 3 | 20.1 km/h |
| Forward - 4 | 27.2 km/h |
| Forward - 5 | 36.9 km/h |
| Forward - 6 | 49.4 km/h |
| Forward - 7 | 67.1 km/h |
| Reverse | 12.4 km/h |
| Note | Maximum travel speeds with standard 27.00R49 (E4) tires. |
Final Drives
| Differential Ratio | 2.736:1 |
| Planetary Ratio | 7.0:1 |
| Total Reduction Ratio | 19.1576:1 |
Brakes
| Brake Standards | ISO 3450-2011 |
| Brake Surface Area - Front | 40846 cm² |
| Brake Surface Area - Rear | 102116 cm² |
Body Hoists
| Pump Flow - High Idle | 458 l/min |
| Relief Valve Setting - Raise | 18950 kPa |
| Relief Valve Setting - Lower | 3450 kPa |
| Body Raise Time - High Idle | 15 s |
| Body Lower Time - Float | 13 s |
| Body Lower Time - High Idle | 13 s |
Capacity - Dual Slope - 100% Fill Factor
| Struck | 41.9 m³ |
| Note (1) | Contact your local Cat dealer for body recommendation. |
| Note (2) | *ISO 6483:1980 |
| Heaped (SAE 2:1)* | 60.2 m³ |
Weight Distributions - Approximate
| Front Axle - Empty | 46 % |
| Front Axle - Loaded | 33 % |
| Rear Axle - Empty | 54 % |
| Rear Axle - Loaded | 67 % |
Suspension
| Rear axle - Oscillation | 5.4 ° |
| Empty Loaded Cylinder Stroke Front | 74.7 mm |
| Empty Loaded Cylinder Stroke Rear | 66 mm |
Service Refill Capacities
| Fuel Tank (1) | 1136 l |
| Cooling System | 228 l |
| Steering System - Including Tank | 53.6 l |
| Torque Converter - Transmission System | 138.5 l |
| Differentials | 227 l |
| Final Drive - Each | 76 l |
| Brake Hoist System | 322 l |
| Fuel Tank (2) | 1325 l |
| Crankcase | 109 l |
| Brake Hoist System - Includes Tank | 444 l |
Tires
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. |
| Note (1) | Productive capabilities of the 777G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
| Standard Tire | 27.00R49 (E4) |
ROPS
| ROPS Standards | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
| FOPS Standards | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. |
Sound
| Sound Standards (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 84 dB(A) for Tier 2 Equivalent. |
| Sound Standards (3) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
| Sound Standards (1) | The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was... |
Steering
| Turning Diameter - Front | 25.3 m |
| Steering Standards | ISO 5010:2007 |
| Steer Angle | 30.5 ° |
| Turning Circle - Clearance Diameter | 28.4 m |
Capacity - X Body - 100% Fill Factor
| Struck | 43.1 m³ |
| Note (1) | Contact your local Cat dealer for body recommendation. |
| Note (2) | *ISO 6483:1980 |
Capacity - Coal Bodies - 100% Fill Factor
| SAE 2:1 - For use with material densities of 1160 kg/m3 (1,950 lb/yd3) | 89 m³ |
| SAE 2:1 - For use with material densities less than 950 kg/m3 (1,600 lb/yd3) | 126 m³ |
| SAE 2:1 - For use with material densities of 1040-1160 kg/m3 (1,750-1,950 lb/yd3) | 106 m³ |
| SAE 2:1 - For use with material densities of 950-1040 kg/m3 (1,600-1,750 lb/yd3) | 110 m³ |