Camioane rigide de talie mare
Pret la cerere
De ce anume aveti nevoie pentru cresterea profitului? Un motor care livreaza mai multa putere si o performanta ridicata pentru cresterea productivitatii? O greutate proprie de top care genereaza o sarcina utila optimizata? O durata de viata mai lunga pentru un numar mare de ore de functionare, costuri reduse si posibilitatea de reconditionare pentru utilizare ulterioara? Cu modelul Cat® 793F, veti beneficia de toate acestea - si chiar mai mult. Acest popular cal de povara industrial este alegerea ideala pentru o mare varietate de aplicatii. Acesta transporta cantitati mai mari, la fiecare incarcare, la fiecare ciclu si la fiecare tura. Sporind in acelasi timp profitul celei mai importante companii miniere din lume, cea pe care o detineti chiar dvs.
Descriere
+
-
Engine
| Engine Model | Cat C175-16 |
| Gross Power - SAE J1995 | 1976 kW |
| Net Power | 1848 kW |
| Net Power - SAE J1349 | 1848 kW |
| Torque Rise | 20 % |
| Bore | 175 mm |
| Stroke | 220 mm |
| Displacement | 85 l |
| Note (1) | Power ratings apply at 1,750 rpm when tested under the specified condition for the specified standard. |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 99 kPa (29.61 Hg) dry barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42.780 kJ/kg (18,390 Btu/lb) when engine used at 30° C (86° F). |
| Note (3) | No engine derating required up to 3810 m (12,500 ft) altitude. |
| Emissions | EPA Compliant. Where applicable, the Cat C175-16 engine is compliant with U.S. Environmental Protection Agency emission requirements. |
Weights - Approximate
| Chassis Weight | 122300 kg |
| Body Weight Range | 26 862-47 627 kg (59,220-105,000 lb) |
| Note (1) | Chassis weight with 100 percent fuel, hoist, body mounting group, rims and 40.00R57 tires. |
| Note (2) | Body weight varies depending on how body is equipped. |
Operating Specifications
| Nominal Payload Capacity | 226.8 t |
| Top Speed - Loaded | 60 km/h |
| Steer Angle | 36 ° |
| Turning Diameter - Front | 28 m |
| Turning Circle - Clearance Diameter | 33 m |
| Gross Machine Operating Weight | 386 007 or 390 089 kg (851,000 or 860,000 lb) |
| Note | Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations. |
Final Drives
| Differential Ratio | 1.8:1 |
| Planetary Ratio | 16:01 |
| Total Reduction Ratio | 28.8:1 |
Transmission
| Forward - 1 | 12.9 km/h |
| Forward - 2 | 17.4 km/h |
| Forward - 3 | 23.8 km/h |
| Forward - 4 | 32.1 km/h |
| Forward - 5 | 43.6 km/h |
| Forward - 6 | 60 km/h |
| Reverse | 11.8 km/h |
Suspension
| Effective Cylinder Stroke - Front | 130.5 mm |
| Effective Cylinder Stroke - Rear | 105.5 mm |
| Rear axle - Oscillation | ±4.9 degrees |
Body Hoists
| Pump Flow - High Idle | 846 l/min |
| Relief Valve Setting - Raise | 20370 kPa |
| Body Raise Time - High Idle | 19 s |
| Body Lower Time - Float | 20 s |
| Body Power Down - High Idle | 17.5 s |
| Note (1) | Twin, two-stage hydraulic cylinders mounted outside main frame, double-acting cylinders in second stage. |
| Note (2) | Power raise in both stages, power down in second stage. |
| Note (3) | Automatic body lower modulation reduces impact on frame. |
Brakes
| Outside Diameter | 874.5 mm |
| Brake Surface - Front | 89817 cm² |
| Brake Surface - Rear | 34500 cm² |
| Standards | J-ISO 3450 JAN88, ISO 3450:1996 |
Weight Distributions - Approximate
| Front Axle - Empty | 48 % |
| Rear Axle - Empty | 52 % |
| Front Axle - Loaded | 33 % |
| Rear Axle - Loaded | 67 % |
Capacity - MSD II - 100% Fill Factor
| Struck | 112-142 m3 (146-186 yd3) |
| Heaped (SAE 2:1) | 159-190 m3 (209-250 yd3) |
| Note | Contact your local Cat dealer for body recommendation. |
Service Refill Capacities
| Fuel Tank | 2839 l |
| Fuel Tank - Optional | 4922 l |
| Cooling System | 1074 l |
| Crankcase | 312 l |
| Rear Axle - Housing | 984 l |
| Steering System - Including Tank | 290 l |
| Brake Hoist System - Includes Tank | 1315 l |
| Torque Converter - Transmission Sump | 102 l |
| Torque Converter/Transmission System - Including Sump | 209 l |
ROPS
| ROPS Standards | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:1994 ROPS criteria. |
| FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:1992 Level II FOPS criteria. |
Sound
| Sound Standards | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 76 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. |
| Sound Standards (1) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
Steering
| Steering Standards | SAE J15111 OCT90, ISO 5010:1992 |