Camioane rigide de talie mare
Pret la cerere
DE CE ANUME AVETI NEVOIE PENTRU CRESTEREA PROFITULUI?
De operatori mai siguri pe manevrele lor, datorita celor mai bune functii de decelerare, franare si control din industrie? De un tren de putere, cu antrenare electrica, proiectat, integrat si verificat de un singur producator? De un sistem de antrenare electric care functioneaza unitar cu motorul si sistemul hidraulic al utilajului?
Cu modelul Cat® 795 AC, veti beneficia de toate acestea - si chiar mai mult. Viteza superioara pe pante si putere mai mare la sol, oferind operatorului un control exceptional. Un motor cu randament inalt si cel mai bun sistem de antrenare electric din categoria sa, pentru o productivitate de top in industrie. Componente modulare si mai multe puncte accesibile de la sol pentru intretinere, generand o disponibilitate mai mare a utilajului. Si durabilitatea pe care o asteptati de la Cat - camioane cu costuri reduse in prima lor viata utila si posibilitatea de reconditionare pentru exploatari ulterioare.
Descriere
+
-
Engine
| Engine Model | Cat® C175-16 |
| Gross Power - SAE J1995 | 2535 kW |
| Gross Power - SAE J1995 - Standard | 2535 kW |
| Gross Power - SAE J1995 - Optional | 2312 kW |
| Rated Speed | 1800 r/min |
| Net Power - SAE J1349 | 2460 kW |
| Emissions Rating | Fuel Optimized/Optional U.S. Environmental Protection Agency Tier 2 Standard Equivalent |
| Bore | 175 mm |
| Stroke | 220 mm |
| Displacement | 85 l |
| Note (1) | Contact factory for trolley configuration. |
Weights - Approximate
| Gross Machine Operating Weight (GMW) | 576072 kg |
| Chassis Weight | 200159 kg |
| Body Weight Range | 37 763-54 500 kg (83,253-120,000 lb) |
| Note (1) | GMW based on 59/80 R63 tires. |
| Note (2) | GMW depends on tire selection. Consult your tire manufacturer for maximum loaded top speed. |
| Note (3) | Chassis weight with 100% fuel, hoist, body mounting group, rims and tires. |
| Note (4) | Body weight varies depending on how body is equipped. |
Operating Specifications
| Nominal Payload Capacity | 337 t |
| Nominal Payload | 337 t |
| Nominal Rated Payload | 337 t |
| Nominal Rated Payload Range | 318-350 tonnes (350-385 tons) |
| Top Speed - Loaded | 64 km/h |
| Steer Angle | 34 ° |
| Turning Diameter - Front | 34 m |
| Turning Circle - Clearance Diameter | 38.7 m |
| Gross Machine Operating Weight (GMW) | 576072 kg |
| Note | For 59/80 R63 tires. |
| Note (1) | Refer to the Cat Mining Truck 10/10/20 Overload Policy (AEXQ0250) for maximum gross machine weight limitations. |
| Note (2) | Nominal Rated Payload assumes no debris and varies with machine configuration. |
| Note (3) | An average payload target of 105% of Nominal Rated Payload can be approved based on review of the specific application and machine configuration. Contact your local Cat dealer for details. |
Final Drives
| Total Reduction Ratio | 35 to 1 |
AC Drive System
| Generator/Alternator | Brushless, remote mounted, dual bearing |
| Controls | IGBT Inverter Technology, air cooled, pressurized cabinet with filtration |
| Wheel Motor | Rear axle mounted Cat AC induction |
| Cooling System | Variable speed, hydraulic cooling system |
Suspension
| Effective Cylinder Stroke - Front | 293 mm |
| Effective Cylinder Stroke - Rear | 141 mm |
| Rear axle - Oscillation | ±4.8° |
Body Hoists
| Pump Flow - High Idle | 935 l/min |
| Relief Valve Setting - Raise | 24500 kPa |
| Body Raise Time - High Idle | 19 s |
| Body Lower Time - Float | 20 s |
| Body Power Down - High Idle | 17.5 s |
| Note (1) | Twin, two-stage hydraulic cylinders mounted inside main frame; double-acting cylinders in second stage. |
| Note (2) | Power raise in both stages; power down in second stage. |
| Note (3) | Automatic body-lower modulation reduces impact on frame. |
Braking System
| Oil Cooled Brakes - Retarding Capable at All Speeds - Outside Diameter | 1067 mm |
| Oil Cooled Brakes - Retarding Capable at All Speeds - Brake Surface - Front | 132258.4 cm² |
| Oil Cooled Brakes - Retarding Capable at All Speeds - Brake Surface - Rear | 198388 cm² |
| Oil Cooled Brakes - Retarding Capable at All Speeds - Standards | ISO 3450:1996 |
| Electric Retarding - Radial Grid Design with Brushless AC Fan Motor | 4750 kW (6,370 hp) rated power |
| Dynamic Retarding Power | 4750 kW |
| Blended Four Corner Retarding | Standard |
Weight Distributions - Approximate
| Front Axle - Loaded | 33 % |
| Rear Axle - Loaded | 67 % |
| Front Axle - Empty | 48 % |
| Rear Axle - Empty | 52 % |
Capacity - MSD II - 100% Fill Factor
| Struck | 121.5-211 m³ (159-276 yd³) |
| Heaped (SAE 2:1) | 181-252 m³ (237-330 yd³) |
| Note | Contact your local Cat dealer for body recommendations. |
Service Refill Capacities
| Fuel Tank | 3596 l |
| Fuel Tank - Optional | 7192 l |
| Cooling System | 1100 l |
| Crankcase | 310 l |
| Final Drive - Each | 341 l |
| Steering Tank | 210 l |
| Steering System - Including Tank | 300 l |
| Brake/Hoist Hydraulic Tank | 508 l |
| Brake Hoist System - Includes Tank | 1500 l |
Tires
| Standard Tires | 59/80 R63 |
| Optional Tires | 56/80 R63 |
| Note (1) | Productive capabilities of the 795F AC truck are such that, under certain job conditions, TKPH (TMPH) capabilities could be exceeded and, therefore, limit production. |
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. |
ROPS
| ROPS Standards | ROPS (Rollover Protective Structure) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
| FOPS Standards | FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 Level II FOPS criteria. |
Sound
| Sound Standards (1) | The operator sound pressure level measured according to work cycle procedures specified in ISO 6394:2008 and 6396:2008 is 76 dB(A) for cab offered by Caterpillar when properly installed and maintained and tested with doors and windows closed. |
| Sound Standards (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
Steering
| Steering Standards | ISO 5010:2007 |
| Note | Gross Machine Operating Weight is 576 072 kg (1,270,000 lb). |
Dimensions (Approximate)
| Height - Top of ROPS | 6327 mm |
| Overall Length | 15146 mm |
| Wheel Base | 6725 mm |
| Rear Axle - Tail | 4411 mm |
| Ground Clearance | 750 mm |
| Dump Clearance | 1664 mm |
| Loading Height - Empty | 7040 mm |
| Overall Height - Body Raised | 15445 mm |
| Centerline Front Tire Width | 6235 mm |
| Engine Guard Clearance | 1208 mm |
| Overall Canopy Width | 9449 mm |
| Outside Body Width | 8970 mm |
| Inside Body Width | 7856 mm |
| Front Canopy Height | 7800 mm |
| Rear Axle - Clearance | 1016 mm |
| Centerline of Rear Dual Tire Width | 5675 mm |
| Overall Tire Width | 8966 mm |
| Note | Dimensions based on 220 m³ (288 yd³) MSD II Body. |