Track Loaders
Pret la cerere
Factory designed and installed features equip your track loader for the extreme heat and harsh conditions of steel mill work. Maneuverability, visibility and the breakout force needed for fast cycle times make crawler loaders a rugged and efficient choice for handling slag.
Descriere
+
-
Engine
| Flywheel Power | 205 kW |
| Engine Model | Cat C9.3 |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final), Korea Tier 4 Final emission standards OR China Nonroad Stage III, India Bharat III, Eurasian Economic Union Stage IIIA UN ECE R96 Stage IIIA emission standards, equivalent to Tier 3/Stage... |
| Engine Power - Maximum - SAE J1995 | 231 kW |
| Engine Power - Maximum - ISO 14396 | 228 kW |
| Engine Power - Maximum - ISO 14396 (DIN) | 228 kW |
| Net Power (Rated) - ISO 9249/SAE J1349 | 205 kW |
| Net Power (Rated) - ISO 9249/SAE J1349 (DIN) | 205 kW |
| Note (1) | Engine ratings at 1,800 rpm. |
| Note (2) | No derating required up to 2164 m (7,200 ft) altitude. |
| Note (3) | All nonroad Tier 4 Interim and Final, Stage IIIB, IV and V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) with 15 ppm (mg/kg) of sulfur or less, or up to B20 biodiesel... |
| Note (4) | Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
Weights
| Operating Weight | 33699 kg |
| Operating Weight - Steel Mill | 33699 kg |
| Shipping Weight - Steel Mill | 28621 kg |
| Note | Steel Mill weights are with new slag bucket. |
Buckets
| Capacity - General Purpose | 3 m³ |
| Capacity - Slag | 3 m³ |
| Width - Slag | 2846 mm |
Undercarriage
| Track Shoe Type | Heavy Duty Sealed and Non Lubricated - Steel Mill, Double Grouser |
| Track Shoe Width - Standard | 500 mm |
| Track Rollers - Each Side | 7 |
| Number of Shoes - Each Side | 40 |
| Track on Ground | 2930 mm |
| Ground Contact Area (ISO 16754:2008): Steel Mill Shoe - 500 mm (19.7 in) | 3.33 m² |
| Ground Pressure* (ISO 16754:2008): Steel Mill Shoe - 500 mm (19.7 in) | 99.3 kPa |
| Grouser Height - Double Grouser | 49 mm |
| Track Gauge | 2160 mm |
| Link Pitch | 215.9 mm |
| Note | * Calculated using Steel Mill operating weight with Slag Bucket. |
Service Refill Capacities
| Fuel Tank | 384 l |
| Cooling System | 44 l |
| DEF Tank | 35 l |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.1 kg of refrigerant which has a CO2 equivalent of 1.573 metric tonnes. |
Dimensions
| Overall Machine Width without Bucket: Steel Mill Tracks - 500 mm (19.7 in) Shoes | 2740 mm |
| Overall Machine Width with Slag Bucket: Steel Mill Tracks - 500 mm (19.7 in) | 2960 mm |
| Ground Clearance | 469 mm |
| Machine Height - Top of Cab | 3560 mm |
| Length - Front of Track | 5323 mm |
| Overall Machine Length* | 7579 mm |
| Carry Position Approach Angle | 15° |
| Digging Depth* | 158 mm |
| Maximum Rollback - Ground/Carry Position | 43°/47° |
| Bucket Height - Carry Position | 483.5 mm |
| Reach at Full Lift Height and 45° Dump* | 1366 mm |
| Clearance at Full Lift Height and 45° Dump* | 2952 mm |
| Maximum Rollback/Dump - Fully Raised | 59°/49° |
| Grading Angle | 85° |
| Height - Bucket Hinge Pin | 4218 mm |
| Overall Machine Height - Bucket Fully Raised | 5752 mm |
| Height to Top of the Seat with Headrest | 2988 mm |
| Height - Top of Stack | 3069 mm |
| Ramp Angle | 29° |
| Note | *With General Purpose bucket Performance with heavy duty teeth. Dimensions vary with bucket. Refer to Operating Specifications chart.
|