Multiprocesoare cu falci-foarfece de taiat otel, MP324 Multiprocesoare cu falci de taiat beton
Multiprocesoare cu falci-foarfece de taiat otel
Pret la cerere
Multiprocesoarele Cat® sunt compatibile cu multiple falci interschimbabile pentru o varietate de sarcini de demolare. Puteti finaliza sarcina mai repede datorita ciclurilor mai scurte. O putere superioara inseamna posibilitatea de preluare a unor lucrari mai ample. Falcile cu montaj rapid permit instalarea uneltei potrivite pentru sarcina executata, fara sa incetiniti ritmul de lucru. Toate construite pe o platforma durabila, usor de intretinut.
Descriere
+
-
Performance
| Cycle Time - Open | 1.8 s |
| Cycle Time - Close | 1.2 s |
| Cutting Force - Blade Throat | 1550 kN |
| Cutting Force - Blade Center | 1894 kN |
| Cutting Force - Blade Tip | 4344 kN |
Hydraulic Requirements
| Jaw Circuit - Max. Oil Pressure | 35000 bar |
| Jaw Circuit - Max. Oil Flow | 225 l/min |
| Rotation Circuit - Max. Oil Pressure | 14000 bar |
| Rotation Circuit - Max. Oil Flow | 40 l/min |
Dimensions - Jaw
| Jaw Depth | 490 mm |
| Cutter Length | 439 mm |
| Jaw Opening - Maximum | 485 mm |
| Jaw Width - Fixed | 286 mm |
| Jaw Width - Moveable | 120 mm |
Dimensions - Housing + Jaw
| Width | 793 mm |
| Length | 2129 mm |
| Height | 1571 mm |
Weight
| Weight - Housing, Jaw and Bracket | 2761 kg |
| Weight - Jaw Only | 1135 kg |
Recommended Carrier Weight
| Excavator Minimum | 24 tons |
| Excavator Maximum | 35 tons |