Multiprocesoare cu falci de taiat beton, MP332
Multiprocesoare cu falci de taiat beton
Pret la cerere
Multiprocesoarele Cat® sunt compatibile cu multiple falci interschimbabile pentru o varietate de sarcini de demolare. Puteti finaliza sarcina mai repede datorita ciclurilor mai scurte. O putere superioara inseamna posibilitatea de preluare a unor lucrari mai ample. Falcile cu montaj rapid permit instalarea uneltei potrivite pentru sarcina executata, fara sa incetiniti ritmul de lucru. Toate construite pe o platforma durabila, usor de intretinut.
Descriere
+
-
Performance
| Cycle Time - Open | 1.9 s |
| Cycle Time - Close | 1.3 s |
| Crushing Force - Primary Cutter | 4258 kN |
| Crushing Force - Cutter Tip | 1816 kN |
| Crushing Force - Tooth Tip | 1367 kN |
Hydraulic Requirements
| Jaw Circuit - Max. Oil Pressure | 350 bar |
| Jaw Circuit - Max. Oil Flow | 280 gal/min |
| Rotation Circuit - Max. Oil Pressure | 2321 psi |
| Rotation Circuit - Max. Oil Flow | 11 gal/min |
Dimensions - Jaw
| Jaw Depth | 869 mm |
| Cutter Length | 19.5 in |
| Jaw Opening - Maximum | 927 mm |
| Jaw Width - Fixed | 13.9 in |
| Jaw Width - Moveable | 5.5 in |
Weight
| Weight - Housing, Jaw and Bracket | 7099 lb |
| Weight - Jaw Only | 1541 kg |
Recommended Carrier Weight
| Excavator Minimum | 32 tons |
| Excavator Maximum | 50 tons |