Multiprocesoare cu falci-foarfece de taiat otel, MP332 Multiprocesoare cu falci de taiat beton
Multiprocesoare cu falci-foarfece de taiat otel
Pret la cerere
Multiprocesoarele Cat® sunt compatibile cu multiple falci interschimbabile pentru o varietate de sarcini de demolare. Puteti finaliza sarcina mai repede datorita ciclurilor mai scurte. O putere superioara inseamna posibilitatea de preluare a unor lucrari mai ample. Falcile cu montaj rapid permit instalarea uneltei potrivite pentru sarcina executata, fara sa incetiniti ritmul de lucru. Toate construite pe o platforma durabila, usor de intretinut.
Descriere
+
-
Performance
| Cycle Time - Open | 1.9 s |
| Cycle Time - Close | 1.3 s |
| Cutting Force - Blade Tip | 1934 kN |
| Cutting Force - Blade Center | 3045 kN |
| Cutting Force - Blade Throat | 7048 kN |
Hydraulic Requirements
| Jaw Circuit - Max. Oil Pressure | 35000 bar |
| Jaw Circuit - Max. Oil Flow | 280 l/min |
| Rotation Circuit - Max. Oil Pressure | 16000 bar |
| Rotation Circuit - Max. Oil Flow | 40 l/min |
Dimensions - Jaw
| Jaw Depth | 600 mm |
| Cutter Length | 600 mm |
| Jaw Opening - Maximum | 521 mm |
| Jaw Width - Fixed | 390 mm |
| Jaw Width - Moveable | 120 mm |
Dimensions - Housing + Jaw
| Width | 1005 mm |
| Length | 2200 mm |
| Height | 1969 mm |
Weight
| Weight - Housing, Jaw and Bracket | 3697 kg |
| Weight - Jaw Only | 2017 kg |
Recommended Carrier Weight
| Excavator Minimum | 32 tons |
| Excavator Maximum | 50 tons |