Miniincarcatoare pe roti
Pret la cerere
Gallery 272D3
Gallery 272D3
272D3

Miniincarcatorul pe roti Cat® 272D3 dispune de un sistem cu ridicare verticala, care asigura inaltime si capacitati de ridicare superioare pentru incarcarea rapida si usoara a camioanelor. Stabilitatea si performantele sale de ridicare asigura o manipulare excelenta a materialelor.

Specificatii tehnice
Descriere
+ -
Engine
Gross Power - SAE J1995 73 kW
Net Power - SAE 1349 71 kW
Displacement 3.8 l
Stroke 120 mm
Bore 100 mm
Peak Torque - 1,500 rpm - SAE J1995 334 N·m
Engine Model Cat C3.8 DIT (turbo)
Net Power - ISO 9249 71 kW
Net Flywheel Power 71 kW
Operating Specifications
Rated Operating Capacity 1570 kg
Tipping Load 3135 kg
Breakout Force - Tilt Cylinder 3376 kg
Breakout Force - Lift Cylinder 2755 kg
Rated Operating Capacity with Optional Counterweight 1675 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850...
Weights
Operating Weight 4143 kg
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850...
Dimensions
Wheel Base 1386 mm
Height - Top of Cab 2094 mm
Vehicle Width over Tires 1829 mm
Ground Clearance 226 mm
Departure Angle 27°
Maximum Dump Angle 51°
Bucket Pin Reach - Maximum Lift 374 mm
Bucket Pin Height - Maximum Lift 3229 mm
Turning Radius from Center - Machine Rear 1899 mm
Reach - Maximum Lift/Dump 769 mm
Bumper Overhang - Behind Rear Axle 1175 mm
Length - Without Bucket 3242 mm
Maximum Overall Height 4067 mm
Turning Radius from Center - Coupler 1482 mm
Maximum Reach - With Arms Parallel to Ground 1282 mm
Clearance at Maximum Lift and Dump 2438 mm
Length - With Bucket on Ground 3954 mm
Bucket Pin Height - Carry Position 198 mm
Turning Radius from Center - Bucket (racked) 2280 mm
Rack Back Angle - Maximum Height 84°
Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850...
Roll Back Angle 28°
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Flow 86 l/min
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 57 kW
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 33 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 121 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 23000 kPa
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 28000 kPa
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I
Power Train
Travel Speed - Forward or Reverse - One Speed 10.6 km/h
Travel Speed - Forward or Reverse - Two Speed Option 15.1 km/h
Service Refill Capacities
Cooling System 16 l
Engine Crankcase 13 l
Fuel Tank 120 l
Hydraulic System 55 l
Hydraulic Tank 39 l
Chain Box - Each Side 10.2 l
Diesel Exhaust Fluid (DEF) Tank 19 l
Air Conditioning System (if equipped)
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Noise Level
Outside Cab** 102 dB(A)
Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling...
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Inside Cab* 83 dB(A)
Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.