Autogredere
Pret la cerere
Autogrederul Cat® 140 (12M3) AWD ofera cele mai bune actualizari pentru a optimiza performanta. Acesta aduce cea mai recenta tehnologie de control al emisiilor, vizibilitate inegalabila, motor si tehnologie de comanda si un palmares care asigura performanta de nivelare si durabilitate maxime.
Descriere
+
-
Engine
| Base Power (1st Gear) - Net | 133 kW |
| Engine Model | Cat® C9.3 |
| Bore | 115 mm |
| Stroke | 149 mm |
| Speed at Rated Power | 2,000 rpm |
| Standard Capability | 43 °C |
| Maximum Torque - VHP Plus | 1138 N·m |
| VHP Plus - Gear - Net Power - Reverse 3rd-6th | 149 kW |
| VHP Plus - Gear - Net Power - Forward 2nd | 141 kW |
| VHP Plus - Gear - Net Power - Forward 5th | 160 kW |
| VHP Plus - Gear - Net Power - Forward 3rd | 149 kW |
| VHP Plus - Gear - Net Power - Forward 8th | 172 kW |
| Torque Rise | 38% |
| VHP Plus - Gear - Net Power - Reverse 2nd | 141 kW |
| VHP Plus - Gear - Net Power - Forward 1st | 133 kW |
| VHP Plus - Gear - Net Power - Forward 6th | 164 kW |
| VHP Plus - Gear - Net Power - Reverse 1st | 133 kW |
| VHP Plus Range - Net | 133-172 kW (179-231 hp) |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| VHP Plus - Gear - Net Power - Forward 7th | 168 kW |
| VHP Plus Range - Net - Metric | 133-172 kW (181-234 hp) |
| VHP Plus - Gear - Net Power - Forward 4th | 156 kW |
| Base Power (1st Gear) - Net - Metric | 133 kW |
| High Ambient - Fan Speed - Standard | 1,400 rpm |
| Displacement | 9.3 l |
| Number of Cylinders | 6 |
| Derating Altitude | 3050 m |
| High Ambient - Fan Speed - Maximum | 1,550 rpm |
| High Ambient - Fan Speed - Minimum | 500 rpm |
| High - Ambient Capability | 50 °C |
Power Train
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Transmission | APECS, Direct Drive, Powershift |
| Brakes - Service | Multiple Oil Disc |
| Brakes - Service - Surface Area | 23000 cm² |
| Brakes - Parking | Multiple Oil Disc |
| Brakes - Secondary | Dual Circuit |
Hydraulic System
| Circuit Type | Parallel |
| Pump Type | Variable Piston |
| Pump Output | 210 l/min |
| Maximum System Pressure | 24150 kPa |
| Reservoir Tank Capacity | 64 l |
| Standby Pressure | 6100 kPa |
Operating Specifications
| Top Speed - Forward | 46.6 km/h |
| Top Speed - Reverse | 36.8 km/h |
| Turning Radius - Outside Front Tires | 7.8 m |
| Steering Range - Left/Right | 50° |
| Articulation Angle - Left/Right | 20° |
| Forward - 1st | 4.1 km/h |
| Forward - 2nd | 5.5 km/h |
| Forward - 3rd | 8 km/h |
| Forward - 4th | 11 km/h |
| Forward - 5th | 17.1 km/h |
| Forward - 6th | 23.3 km/h |
| Forward - 7th | 32 km/h |
| Forward - 8th | 46.6 km/h |
| Reverse - 1st | 3.2 km/h |
| Reverse - 2nd | 6 km/h |
| Reverse - 3rd | 8.7 km/h |
| Reverse - 4th | 13.5 km/h |
| Reverse - 5th | 25.3 km/h |
| Reverse - 6th | 36.8 km/h |
Service Refill
| Fuel Capacity | 394 l |
| Cooling System | 57 l |
| Hydraulic System - Total | 100 l |
| Hydraulic System - Tank | 64 l |
| Diesel Exhaust Fluid | 22 l |
| Transmission - Differential - Final Drives | 70 l |
| Engine Oil | 30 l |
| Tandem Housing - Each | 76 l |
| Front Wheel Spindle Bearing Housing | 0.5 l |
| Circle Drive Housing | 7 l |
Frame
| Drawbar - Width | 76.2 mm |
| Circle - Diameter | 1530 mm |
| Circle - Blade Beam Thickness | 40 mm |
| Drawbar - Height | 152 mm |
| Front Frame Structure - Height | 321 mm |
| Circle - Height | 138 mm |
| Front Frame Structure - Width | 305 mm |
| Drawbar - Thickness | 12.7 mm |
| Front-Top/Bottom Plate - Width | 305 mm |
| Front-Top/Bottom Plate - Thickness | 22 mm |
| Front Axle - Height to Center | 596 mm |
| Front Axle - Wheel Lean - Left/Right | 18° |
| Front Axle - Total Oscillation per Side | 32° |
Tandems
| Height | 506 mm |
| Width | 201 mm |
| Sidewall Thickness - Inner | 16 mm |
| Sidewall Thickness - Outer | 18 mm |
| Drive Chain Pitch | 50.8 mm |
| Wheel Axle Spacing | 1523 mm |
| Tandem Oscillation - Front Up | 15° |
| Tandem Oscillation - Front Down | 25° |
Moldboard
| Blade Width | 3.7 m |
| Moldboard - Height | 610 mm |
| Moldboard - Thickness | 22 mm |
| Arc Radius | 413 mm |
| Throat Clearance | 166 mm |
| Cutting Edge Width | 152 mm |
| Cutting Edge Thickness | 16 mm |
| End Bit - Width | 152 mm |
| End Bit - Thickness | 16 mm |
| Blade Pull - Base GVW | 11462 kg |
| Blade Pull - Maximum GVW | 15541 kg |
| Blade Down Pressure - Base GVW | 7275 kg |
| Blade Down Pressure - Maximum GVW | 13294 kg |
| Moldboard - Blade Width | 3.7 m |
Blade Range
| Circle Centershift - Right | 728 mm |
| Circle Centershift - Left | 695 mm |
| Moldboard Sideshift - Right | 660 mm |
| Moldboard Sideshift - Left | 510 mm |
| Maximum Blade Position Angle | 90° |
| Blade Tip Range - Forward | 40° |
| Blade Tip Range - Backward | 5° |
| Maximum Shoulder Reach Outside of Tires - Right | 1978 mm |
| Maximum Shoulder Reach Outside of Tires - Left | 1790 mm |
| Maximum Lift Above Ground | 480 mm |
| Maximum Depth of Cut | 715 mm |
Ripper
| Ripping Depth - Maximum | 426 mm |
| Ripper Shank Holder Spacing | 533 mm |
| Ripper Shank Holders | 5 |
| Penetration Force | 9440 kg |
| Pry-Out Force | 12607 kg |
| Machine Length Increase, Beam Raised | 1031 mm |
Scarifier
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 116 mm |
| Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 467 mm |
| Mid, V-Type - Scarifier Shank Holders | 11 |
| Rear - Scarifying Depth, Maximum | 426 mm |
| Front, V-Type, 5 or 11 Tooth - Working Width | 1031 mm |
| Front, V-Type - Working Width | 1205 mm |
| Mid, V-Type - Working Width | 1184 mm |
| Mid, V-Type - Scarifying Depth, Maximum | 292 mm |
| Mid, V-Type - Scarifier Shank Holder Spacing | 116 mm |
| Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders | 5/11 |
| Rear - Working Width | 2133 mm |
| Rear - Scarifier Shank Holders | 9 |
| Rear - Scarifier Shank Holder Spacing | 267 mm |
Weights
| Operating Weight - Typically Equipped | 19344 kg |
| Gross Vehicle Weight - Maximum - Front Axle | 7745 kg |
| Gross Vehicle Weight - Maximum - Rear Axle | 17268 kg |
| Operating Weight - Typically Equipped - Front Axle | 5468 kg |
| Operating Weight - Typically Equipped - Rear Axle | 13876 kg |
| Gross Vehicle Weight - Base - Front Axle | 4238 kg |
| Gross Vehicle Weight - Base - Rear Axle | 12736 kg |
| Gross Vehicle Weight - Maximum - Total | 25013 kg |
| Gross Vehicle Weight - Base - Total | 16974 kg |
| Operating Weight - Typically Equipped - Total | 19344 kg |
Dimensions
| Height - Top of Cab | 3308 mm |
| Length - Counterweight to Ripper | 10136 mm |
| Width - Outside Front Tires | 2511 mm |
| Length - Front Axle to Mid Tandem | 6123 mm |
| Length - Front Tire to Rear of Machine | 8912 mm |
| Length - Front Axle to Moldboard | 2552 mm |
| Length - Between Tandem Axles | 1523 mm |
| Width - Outside Rear Tires | 2511 mm |
| Width - Tire Center Lines | 2140 mm |
| Height - Front Axle Center | 596 mm |
| Height - Exhaust Stack | 3256 mm |
| Height - Top of Cylinders | 3040 mm |
| Ground Clearance - Rear Axle | 339 mm |
Standards
| Brakes | ISO 3450 |
| Sound | ISO 6394; ISO 6395 |
| Steering | ISO 5010 |
| ROPS/FOPS | ISO 3471/ISO 3499 |