Hydraulic Mining Shovels
Pret la cerere
The new Cat 6015B Hydraulic Shovel meets your need to move more material at a lower cost, so you can achieve production targets, deliver on your commitments, meet deadlines – and maximize your profitability. Load more, make more.
Descriere
+
-
General
| Engine Output - SAE J1995 | 606 kW |
| Bucket Payload | 14.6 t |
| Operating Weight | 154.3 t |
| Note | Specifications shown above apply to Backhoe configuration. A Frontless configuration is also available. |
Engine - U.S. EPA Tier 4 Final
| Engine Model | Cat® C27 |
| Gross Power - SAE J1995 | 606 kW |
| Net Power - SAE J1349 | 556 kW |
Engine - Cat C27 ACERT with Tier 4 Final Emission Standards
| Number of Cylinders | 12 |
| Bore | 137.2 mm |
| Stroke | 152.4 mm |
| Displacement | 27 l |
| Maximum Altitude - Without Deration - Above Sea Level | 3048 m |
| Net Power - SAE J1349 | 556 kW (746 hp 1,800 min-1) |
| Gross Power - SAE J1995 | 606 kW (813 hp 1,800 min-1) |
Engine - Equivalent to U.S. EPA Tier 2
| Engine Model | Cat® C27 |
| Gross Power - SAE J1995 | 606 kW |
| Net Power - SAE J1349 | 556 kW |
Engine - Cat C27 ACERT with Tier 1 or Tier 2 Equivalent Emission Standards
| Number of Cylinders | 12 |
| Bore | 137.2 mm |
| Stroke | 152.4 mm |
| Displacement | 27 l |
| Aspiration | Turbocharged and aftercooled |
| Maximum Altitude - Without Deration - Above Sea Level | 4420 m |
| Net Power - SAE J1349 | 556 kW (746 hp 1,800 min-1) |
| Gross Power - SAE J1995 | 606 kW (813 hp 1,800 min-1) |
Engine
| Emissions | U.S. EPA Tier 4 Final, Tier 2 Equivalent or Tier 1 Equivalent |
| Gross Power - SAE J1995 | 606 kW |
| Net Power - SAE J1349 | 556 kW |
| Engine Model | Cat® C27 |
Operating Weights - Backhoe
| Operating Weight | 140 t |
Weights
| Ground Pressure | 16.3 N/cm² |
| Note | Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick |
Track
| Standard | 700 mm |
| Wide | 900 mm |
| Extra Wide | 1000 mm |
| Number of Shoes - Each Side | 46 |
| Number of Track Rollers - Each Side | 9 |
| Number of Carrier Rollers - Each Side | 3 |
| Track Pads | Double grouser |
Drive
| Travel Speed - Two Stages - 1st Stage - Maximum | 2.3 km/h |
| Travel Speed - Two Stages - 2nd Stage - Maximum | 3.3 km/h |
| Maximum Drawbar Pull - Forward | 858 kN |
| Maximum Drawbar Pull - Reverse | 983 kN |
| Gradeability - Travel Drives | Approximately 42% |
| Hydraulic Track Tensioning | With accumulator |
Service Refill Capacities
| Fuel Tank | 1700 l |
| Cooling System | 165 l |
| Engine Oil | 87 l |
| Swing Drive | 9 l |
| Hydraulic System - Including Tank | 1752 l |
| Hydraulic Tank | 956 l |
| Grease Tank | 68 l |
Electrical System
| System Voltage | 24V |
| Batteries | 4 × 200Ah (12V each) |
| Alternator Rating | 150A (24V) |
| Components (1) | Emergency stop in cabin, engine module, pump room and on service station accessible from ground level |
| Components (2) | All around lighting |
| Components (4) | Five (5) lights for front |
| Components (9) | One (1) beacon light on cabin roof |
| Components (8) | One (1) light for machine deck/service |
| Components (6) | One (1) light for right side |
| Components (3) | Four (4) lights on attachment |
| Components (5) | Two (2) lights for left side |
| Components (7) | Two (2) lights for rear end |
Hydraulic System
| Main Pumps - Maximum Pressure - Travel | 320 bar |
| Main Pumps - Maximum Pressure - Attachment | 320 bar |
| Main Pumps - Maximum Total Oil Flow | 1544 l/min |
| Main Pumps | 3 × variable swash plate pumps |
| Swing Pump - Maximum Flow - Swing | 479 l/min |
| Swing Pump | 1 × variable swash plate pump |
| Swing Pump - Maximum Pressure - Swing | 365 bar |
| Pilot Pump - Maximum Pressure, Pilot | 95 bar |
| Pilot Pump | 1 × gear pump |
| Pilot Pump - Maximum Flow, Pilot | 153 l/min |
| Engine Fan Pump - Maximum Pressure, Engine Fan | 220 bar |
| Engine Fan Pump | 1 × variable swash plate pump |
| Engine Fan Pump - Maximum Flow, Engine Fan | 201 l/min |
| Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan | 86 l/min |
| Hydraulic Fan Pump | 1 × variable swash plate pump |
| Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan | 135 bar |
| Hydraulic Oil Cooling - Diameter of Fan | 1016 mm |
| Hydraulic Oil Cooling - Maximum Flow | 1075 l/min |
| Filters (1) | Full-flow high-pressure filters (200 μm) for main pumps |
| Filters (2) | Full-flow filters (20 μm) for complete return circuit |
| Filters (3) | Pressure filters (16 μm) for servo circuit |
| Filters (5) | Swing charge filter (15 μm) |
| Filters (6) | Pump case return screens (125 μm) |
| Filters (4) | Full-flow filters (6 μm) for engine cooling return circuit |
Swing System
| Swing Drive | Two (2) compact planetary transmissions with axial piston motors |
| Parking Brake | Wet multiple disc brake, spring-loaded/hydraulically released |
| Maximum Swing Speed | 4.9 r/min |
| Swing Ring | Cross roller bearing with sealed internal gearing |
| Features (1) | Closed-loop swing circuit with speed control |
| Features (2) | Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking |
| Features (3) | All raceways and the internal gearing of swing ring supplied by automatic central lubrication system |
Centralized Service Area
| Feature | Accessible from ground level |
| Equipped With (1) | Emergency stop |
| Equipped With (2) | Quick couplings for: – Diesel fuel – Grease |
Undercarriage
| Travel Speed - Two Stages - 1st Stage - Maximum | 2.3 km/h |
| Travel Speed - Two Stages - 2nd Stage - Maximum | 3.3 km/h |
| Maximum Drawbar Pull - Forward | 858 kN |
| Maximum Drawbar Pull - Reverse | 983 kN |
| Gradeability - Travel Drives | Approximately 42% |
| Hydraulic Track Tensioning | With accumulator |
| Number of Shoes - Each Side | 46 |
| Number of Track Rollers - Each Side | 9 |
| Number of Carrier Rollers - Each Side | 3 |
| Components (2) | Chain links connected by hardened pins and bushings |
| Components (5) | Fully hydraulic self-adjusting track tensioning system with accumulator |
| Components (7) | Audible travel alarm |
| Components (3) | Cat D11 Track-Type Tractor links |
| Components (6) | Automatic hydraulic retarder valve to prevent overspeed on downhill travel |
| Components (1) | Forged double-grouser track pads |
| Components (4) | All running surfaces of sprockets, idlers, rollers and track chain links hardened |
Operator's Cab
| Components (7) | Beverage holder |
| Components (4) | Glass-breaking safety hammer |
| Components (19) | Laminated glass front upper window and tempered other windows |
| Components (14) | Adjustable armrest |
| Components (9) | AM/FM radio |
| Components (17) | Travel control pedals with removable hand levers |
| Components (15) | Height-adjustable joystick consoles |
| Components (10) | Radio with MP3 auxiliary audio port |
| Components (16) | Neutral lever (lock out) for all controls |
| Components (1) | Pressurized operator station with positive filtration |
| Components (2) | Mirror package |
| Components (11) | Two stereo speakers |
| Components (12) | Storage shelf suitable for lunch or toolbox |
| Components (8) | Literature holder |
| Components (18) | Two power outlets, 10 amp (total) |
| Components (6) | Coat hook |
| Components (5) | Removable lower windshield with in cab storage bracket |
| Components (13) | Color LCD display with warning, filter/fluid change, and working hour information |
| Components (3) | Sliding upper door window (left-hand cab door) |
Automatic Lubrication System
| Capacity - Grease Barrel | 68 l |
| Type (2) | Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing |
| Type (3) | Standard grease reel on machine for bucket linkage |
| Type (1) | Central bank lubrication system |
| Type (4) | Grease refill service point accessible from ground |
Attachments
| Type (1) | Boom and stick torsion-resistant with welded box design |
| Type (2) | High-tensile steel with solid steel castings at pivot areas |
| Type (3) | Boom and stick stress-relieved after welding |
| Type (4) | Float valve for boom down function |
| Buckets Equipped With | – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds |
Backhoe Attachment (BH) - Working Range
| Maximum Digging Depth | 7.9 m |
| Maximum Digging Reach | 13.9 m |
| Maximum Digging Height | 13.2 m |
| Maximum Dump Height | 8.7 m |
Backhoe Attachment (BH) - Digging Forces
| Bucket Digging Force - SAE | 501 kN |
| Stick Digging Force - SAE | 439 kN |
| Bucket Digging Force - ISO | 586 kN |
| Stick Digging Force - ISO | 458 kN |
Backhoe Attachment (BH) - Backhoe
| Tooth System | Cat C70 penetration tip with CapSure lock |
| Capacity 1:1 | 8.1 m³ |
| Total Width | 2682 mm |
| Number of Teeth | 5 |
| Weight - Including Standard Wear Package | 7528 kg |
| Maximum Material Density - Loose | 1.8 t/m³ |
Operating Specifications
| Bucket Payload | 14.6 t |
| Operating Weight | 140 t |