Cat are placerea de a va prezenta camionul rigid 773G. Poate ca va intrebati cum reuseste Cat, dupa 40 de ani de experienta in constructia de camioane, sa imbunatateasca acest produs pentru a sustine mai eficient afacerea dvs.
Seria G a fost conceputa si fabricata folosind cele mai recente tehnologii de control al calitatii - virtuale si fizice. Acest produs ofera o functionare demonstrata de 30000 de ore in posesia clientilor inainte de productie, ceea ce atesta ca produsul livrat este gata de utilizare, fiabil si de incredere.
Alaturi de calitate, camioanele din seria G va ofera si beneficiul reducerii costurilor, datorita celor sapte optiuni diferite de conservare a combustibilului. Va punem la dispozitie doua moduri de economisire de combustibil, care pot fi personalizate, putand alege singuri gradul de economisire. Cu seria G de camioane Cat, veti fi mai productiv, veti aloca mai putin timp pentru intretinere si veti sustine mediul inconjurator cu noile niveluri de performanta ecologica. Echipa dvs. va aprecia confortul si noile facilitati din cabina modernizata. Mai simplu spus, camioanele din seria G vor marca o diferenta pozitiva atat pentru afacerile dvs. cat si pentru personalul operational - pe toata durata zilei, zi de zi.
| Engine Model | Cat® C27 |
| Rated Engine Speed | 2000 r/min |
| Gross Power - SAE J1995 | 615 kW |
| Net Power - SAE J1349 | 584 kW |
| Net Power - 80/1269/EEC | 590 kW |
| Net Power - ISO 9249 | 590 kW |
| Bore | 137 mm |
| Stroke | 152 mm |
| Displacement | 27 l |
| Engine Power - ISO 14396 | 607 kW |
| Net Torque | 3896 N·m |
| Note (3) | No engine derating required up to 3810 m (12,500 ft) for Tier 2 Equivalent. |
| Peak Torque - Speed | 1300 r/min |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
| Note (1) | Power rating applies at 2,000 rpm when tested under the specified condition for the specified standard. |
| Maximum Gross Vehicle Weight | 102740 kg |
| Nominal Payload Class (100%) | 56 t |
| Top Speed - Loaded | 67.6 km/h |
| Maximum Working Payload (110%) | 61.5 t |
| Body Capacity - SAE 2:1 | 35.75 m³ |
| Note (2) | * Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. |
| Note (1) | Capacity with Dual Slope body – no liner. |
| Maximum Allowable Payload (120%)* | 67.1 t |
| Target Payload (100%) | 56 t |
| Forward - 1 | 10.8 km/h |
| Forward - 2 | 15.1 km/h |
| Forward - 3 | 20.4 km/h |
| Forward - 4 | 27.4 km/h |
| Forward - 5 | 37 km/h |
| Forward - 6 | 50.1 km/h |
| Forward - 7 | 67.6 km/h |
| Reverse | 14.1 km/h |
| Note | Maximum travel speeds with standard 24.00R35 (E4) tires. |
| Differential Ratio | 3.64:1 |
| Planetary Ratio | 4.80:1 |
| Total Reduction Ratio | 17.49:1 |
| Brake Surface - Front | 655 cm² |
| Brake Surface - Rear | 61269 cm² |
| Brake Standards | ISO 3450:2011 |
| Pump Flow - High Idle | 448 l/min |
| Relief Valve Setting - Raise | 17250 kPa |
| Relief Valve Setting - Lower | 3450 kPa |
| Body Raise Time - High Idle | 9.5 s |
| Body Lower Time - Float | 13 s |
| Body Power Down - High Idle | 13 s |
| Struck | 26.86 m³ |
| Heaped (SAE 2:1)* | 35.75 m³ |
| Note (1) | Contact your local Cat dealer for body recommendation. |
| Note (2) | * ISO 6483:1980. |
| Struck | 26.25 m³ |
| Heaped (SAE 2:1)* | 35.49 m³ |
| Note (1) | Contact your local Cat dealer for body recommendation. |
| Note (2) | * ISO 6483:1980. |
| Front Axle - Empty | 53 % |
| Front Axle - Loaded | 35 % |
| Rear Axle - Empty | 47 % |
| Rear Axle - Loaded | 65 % |
| Rear axle - Oscillation | 8.1 ° |
| Empty Loaded Cylinder Stroke Rear | 149 mm |
| Empty Loaded Cylinder Stroke Front | 234 mm |
| Fuel Tank | 795 l |
| Cooling System | 171 l |
| Differential - Final Drives | 145 l |
| Steering Tank | 36 l |
| Steering System - Including Tank | 54 l |
| Crankcase | 90 l |
| Torque Converter - Transmission System - LRC | 61 l |
| Brake Hoist System | 322 l |
| Brake/Hoist Hydraulic Tank | 176 l |
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. |
| Note (1) | Productive capabilities of the 773G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
| Standard Tire | 24.00R35 (E4) |
| ROPS Standards | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
| FOPS Standards | Falling Object Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. |
| Sound Standards (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 86 dB(A). |
| Sound Standards (3) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
| Sound Standards (1) | The operator Equivalent Sound Pressure Level (Leq) is 76 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was... |
| Turning Diameter - Front | 23.5 m |
| Steering Standards | SAE J1511 FEB94 ISO 5010:1992 |
| Steer Angle | 31 ° |
| Turning Circle - Clearance Diameter | 26.1 m |