Underground Mining Trucks, AD30, Cat® C15
Underground Mining Trucks
Pret la cerere
Ideally suited to entry sizes of 4 × 4 meters, the AD30 is a medium to smaller mine hauler that is perfectly pass matched to the R1600H LHD.
Descriere
+
-
Engine
| Engine Model | Cat® C15 |
| Gross Power - SAE J1995 | 305 kW |
| Gross Power - VR Engine - SAE J1995 | 305 kW |
| Gross Power - Tier 3 Engine - SAE J1995 | 305 kW |
| Bore | 137.2 mm |
| Stroke | 171.5 mm |
| Displacement | 15.2 l |
| Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
| Gross Power - Equivalent to U.S. EPA Tier 3/EU Stage IIIA - SAE J1995 | 305 kW |
| Rated Power | 1800 r/min |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (4) | Optional Ventilation Reduction package available. |
| Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
Operating Specifications
| Nominal Payload Capacity | 30000 kg |
| Gross Machine Mass | 60000 kg |
| Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) |
Weights
| Empty | 28870 kg |
| Loaded | 60000 kg |
| Empty - Rear Axle | 9391 kg |
| Loaded - Rear Axle | 33487 kg |
| Empty - Front Axle | 19479 kg |
| Loaded - Front Axle | 26513 kg |
Weight Distribution
| Empty - Rear Axle | 32.50% |
| Loaded - Front Axle | 44.20% |
| Loaded - Rear Axle | 55.80% |
| Empty - Front Axle | 67.50% |
Transmission
| Forward - 1 | 6.3 km/h |
| Forward - 2 | 11.3 km/h |
| Forward - 3 | 20.8 km/h |
| Forward - 4 | 36.7 km/h |
| Reverse - 1 | 7.1 km/h |
| Note | Maximum travel speeds with standard 26.5 × R25 tires. |
Final Drives
| Differential Ratio | 3.38:1 |
| Final Drive Ratio | 4.76:1 |
| Total Reduction Ratio | 16.13:1 |
| Note | Fully floating axles. |
Body Hoist
| Raise | 10.5 s |
| Lower | 11.2 s |
| Total Cycle Time | 21.7 s |
Body Capacities
| Body 1 | 11.3 m³ |
| Body 2 - Standard Body | 14.4 m³ |
| Body 3 | 17.5 m³ |
| Wide Body | 16.8 m³ |
| Ejector Body (1) | 15.2 m³ |
| Ejector Body (2) | 16.8 m³ |
| Note | Heaped SAE 2:1. |
Turning Dimensions
| Outside Clearance Radius | 8571 mm |
| Inner Clearance Radius | 5030 mm |
| Articulation Angle | 42.5 ° |
| Frame Oscillation | 10 Degrees |
Service Refill Capacities
| Engine Crankcase - With Filter | 34 l |
| Transmission | 67 l |
| Hydraulic Tank | 145 l |
| Cooling System | 74 l |
| Front Differential and Final Drives | 56 l |
| Rear Differential and Final Drives | 56 l |
| Fuel Tank | 410 l |
Tires
| Tire Size | 26.5 × R25 VSNT |
Standards
| Standards | ROPS/FOPS Certified Cab |