Buldozere de talie mica
Pret la cerere
Noul Cat® D2 ofera performante superioare si cea mai extinsa gama de functii tehnologice, pentru a va permite sa obtineti maximum de la buldozerul dvs. Agil si receptiv, are suficienta putere pentru a impinge, dar si finete pentru nivelare. Transmisia complet hidrostatica ofera utilajului o accelerare perfecta, astfel incat sa puteti finaliza lucrarea rapid. Sistemul cu senzor de sarcina optimizeaza automat viteza la sol in functie de sarcina, pentru a obtine cea mai buna productivitate si cel mai bun consum de combustibil.
Descriere
+
-
Engine
| Engine Model | Cat® C3.6 |
| Power - Net | 68.8 kW |
| Displacement | 3.6 l |
| Net Power - 2,200 rpm - SAE J1349 | 68.8 kW |
| Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 | 68.8 kW |
| Note (1) | Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
| Note (2) | All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
Engine
| Power Train | Hydrostatic |
Weights
| Operating Weight | 8338 kg |
| Operating Weight - LGP | 8648 kg |
| Note (2) | For machine with ripper, add 554 kg (1,222 lb). |
| Note (1) | Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Weights
| Operating Weight | 8338 kg |
Cab
| FOPS | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
Transmission
| Drive Pumps | 1 |
| Maximum Travel Speed - Forward | 9 km/h |
| Relief Valve Settings | 48500 kPa |
| Maximum Travel Speed - Reverse | 10 km/h |
| Track Motors | 2 |
Undercarriage
| Length - Track on Ground - LGP | 2248 mm |
| Track Gauge | 1550 mm |
| Number of Rollers - Each Side | 7 |
| Track Gauge - LGP | 1725 mm |
| Ground Pressure - LGP | 29.7 kPa |
| Shoe Width - Standard | 460 mm |
| Shoe Width - LGP | 635 mm |
| Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage | 43 |
Undercarriage
| Number of Shoes - Each Side - Abrasion Undercarriage | 38 |
| Ground Pressure | 39.5 kPa |
| Length of Track on Ground | 2248 mm |
Service Refill Capacities
| Fuel Tank | 195 l |
| Crankcase - With Filter | 10.5 l |
| Final Drive - Each - LGP | 10 l |
| Cooling System | 19 l |
| Transmission - Hydraulic Tank | 90 l |
| Diesel Exhaust Fluid (DEF) Tank | 19 l |
Service Refill Capacities
| Final Drives - Each Side | 10 l |
Hydraulic Controls
| Pump Output | 65 l/min |
| Relief Valve Settings | 20600 kPa |
Ripper
| Type | Parallelogram |
| Number of Shanks | 3 |
| Height | 165 mm |
| Weight | 554 kg |
| Maximum Digging Depth | 337.5 mm |
| Maximum Ground Clearance Under Tip | 448 mm |
| Overall Width | 1710 mm |
| Maximum Reach - Ground Line | 766 mm |
Winch
| Weight | 610 kg |
| Winch Drive | Hydrostatic |
| Control | Hydraulic |
| Speed | Variable |
| Overall Width | 741 mm |
| Winch Length | 705 mm |
| Maximum Line Pull - Bare Drum | 18144 kg |
| Throat Clearance | 171.5 mm |
| Rope Diameter - Recommended | 16 mm |
| Drum Capacity - Optional Cable | 78 m |
| Maximum Line Speed - Bare Drum | 40 m/min |
| Drum Capacity - Recommended Cable | 113 m |
| Rope Diameter - Optional | 19 mm |
| Maximum Line Pull - Full Drum | 11340 kg |
| Drum Diameter | 254 mm |
| Maximum Line Speed - Full Drum | 63 m/min |
| Drum Width | 274 mm |
Air Conditioning System
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Dimensions
| BLADE: Digging Depth - LGP | 590 mm |
| BLADE: Blade Width - Intermediate | 2921 mm |
| Length - Basic Tractor - Without Blade - LGP | 3290 mm |
| BLADE: Maximum Angle (either side) - Intermediate | 25° |
| BLADE: Blade Cutting Edge Angle, Adjustable - LGP | 52° to 58° |
| BLADE: Blade Lift Height - LGP | 708 mm |
| BLADE: Maximum Tilt - Intermediate | 448 mm |
| BLADE: Digging Depth - Intermediate | 590 mm |
| BLADE: Blade Lift Height - Intermediate | 743 mm |
| BLADE: Blade Width - LGP | 3149 mm |
| Width - Tractor - Standard Shoes - No Blade - LGP | 2360 mm |
| BLADE: Blade Width at Maximum Angle - LGP | 2874 mm |
| Tractor Height - LGP | 2765 mm |
| Track Gauge - LGP | 1725 mm |
| Ground Clearance - LGP | 332 mm |
| BLADE: Blade Height - LGP | 910 mm |
| Overall Length - With Blade - LGP | 4272 mm |
| BLADE: Blade Capacity (SAE) - LGP | 1.85 m³ |
| BLADE: Blade Height - Intermediate | 860 mm |
| BLADE: Blade Capacity (SAE) - Intermediate | 1.5 m³ |
| BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate | 52° to 58° |
| BLADE: Maximum Tilt - LGP | 438 mm |
| BLADE: Blade Width at Maximum Angle - Intermediate | 2669 mm |
| BLADE: Maximum Angle (either side) - LGP | 25° |
| Note | Abrasion Undercarriage |
Dimensions
| Width - Tractor - Standard Shoes - No Blade - Standard | 2010 mm |
| BLADE: Maximum Angle (either side) - Standard | 25° |
| Ground Clearance - Standard | 332 mm |
| Length - Basic Tractor - Without Blade - Standard | 3290 mm |
| Overall Length - With Blade - Standard | 4281 mm |
| BLADE: Blade Cutting Edge Angle, Adjustable - Standard | 52° to 58° |
| BLADE: Maximum Tilt - Standard | 387 mm |
| Track Gauge - Standard | 1550 mm |
| Tractor Height - Standard | 2765 mm |
| BLADE: Digging Depth - Standard | 573 mm |
| BLADE: Blade Width - Standard | 2782 mm |
| BLADE: Blade Lift Height - Standard | 743 mm |
| BLADE: Blade Capacity (SAE) - Standard | 1.98 m³ |
| BLADE: Blade Width at Maximum Angle - Standard | 2542 mm |
| BLADE: Blade Height - Standard | 1010 mm |