Multiprocesoare cu falci universale, MP318 Falci universale
Multiprocesoare cu falci universale
Pret la cerere
Multiprocesoarele Cat® sunt compatibile cu multiple falci interschimbabile pentru o varietate de sarcini de demolare. Puteti finaliza sarcina mai repede datorita ciclurilor mai scurte. O putere superioara inseamna posibilitatea de preluare a unor lucrari mai ample. Falcile cu montaj rapid permit instalarea uneltei potrivite pentru sarcina executata, fara sa incetiniti ritmul de lucru. Toate construite pe o platforma durabila, usor de intretinut.
Descriere
+
-
Performance
| Cycle Time - Open | 1.6 s |
| Cycle Time - Close | 1.6 s |
| Crushing Force - Primary Cutter | 2661 kN |
| Crushing Force - Cutter Tip | 1489 kN |
| Crushing Force - Tooth Tip | 855 kN |
Hydraulic Requirements
| Jaw Circuit - Max. Oil Pressure | 350 bar |
| Jaw Circuit - Max. Oil Flow | 150 l/min |
| Rotation Circuit - Max. Oil Pressure | 140 bar |
| Rotation Circuit - Max. Oil Flow | 40 l/min |
Dimensions - Jaw
| Jaw Depth | 565 mm |
| Cutter Length | 399 mm |
| Jaw Opening - Maximum | 468 mm |
| Jaw Width - Fixed | 379 mm |
| Jaw Width - Moveable | 214 mm |
Dimensions - Housing + Jaw
| Length | 2000 mm |
| Height | 1274 mm |
| Width | 793 mm |
Weight
| Weight - Housing, Jaw and Bracket | 1970 kg |
| Weight - Jaw Only | 758 kg |
Recommended Carrier Weight
| Excavator Minimum | 18 tons |
| Excavator Maximum | 25 tons |