Multiprocesoare cu falci de taiat beton, MP345
Multiprocesoare cu falci de taiat beton
Pret la cerere
Multiprocesoarele Cat® sunt compatibile cu multiple falci interschimbabile pentru o varietate de sarcini de demolare. Puteti finaliza sarcina mai repede datorita ciclurilor mai scurte. O putere superioara inseamna posibilitatea de preluare a unor lucrari mai ample. Falcile cu montaj rapid permit instalarea uneltei potrivite pentru sarcina executata, fara sa incetiniti ritmul de lucru. Toate construite pe o platforma durabila, usor de intretinut.
Descriere
+
-
Performance
| Cycle Time - Open | 1.9 s |
| Cycle Time - Close | 1.3 s |
| Crushing Force - Primary Cutter | 5102 kN |
| Crushing Force - Cutter Tip | 2382 kN |
| Crushing Force - Tooth Tip | 1670 kN |
Hydraulic Requirements
| Jaw Circuit - Max. Oil Pressure | 5076 psi |
| Jaw Circuit - Max. Oil Flow | 280 gal/min |
| Rotation Circuit - Max. Oil Pressure | 160 bar |
| Rotation Circuit - Max. Oil Flow | 11 gal/min |
Dimensions - Jaw
| Jaw Depth | 913 mm |
| Cutter Length | 501 mm |
| Jaw Opening - Maximum | 1023 mm |
| Jaw Width - Fixed | 20 in |
| Jaw Width - Moveable | 187 mm |
Weight
| Weight - Housing, Jaw and Bracket | 9515.1 lb |
| Weight - Jaw Only | 4969.2 lb |
Recommended Carrier Weight
| Excavator Minimum | 45 tons |
| Excavator Maximum | 65 tons |